MIB MODULE INSIGHT-QVS-STORE-ACCESS-MIB

Imported Definitions


Last Updated:200411221540Z
Organization:QVS Software, Inc.
Contact:Dennis Taylor/Mark King
email:InSightSupport@qvssoftware.com
Purpose:MIB supported by QVS InSight product. InSight provides
access to retail store systems servers and POS terminals.

Imported Definitions
Definition Source
MODULE-IDENTITY SNMPv2-SMI
OBJECT-TYPE SNMPv2-SMI
enterprises SNMPv2-SMI
Integer32 SNMPv2-SMI
UInteger32 SNMPv2-SMI
TimeTicks SNMPv2-SMI
Counter32 SNMPv2-SMI
IpAddress SNMPv2-SMI
Opaque SNMPv2-SMI
Gauge32 SNMPv2-SMI
Counter64 SNMPv2-SMI
DateAndTime SNMPv2-TC
DisplayString SNMPv2-TC
MacAddress SNMPv2-TC
TEXTUAL-CONVENTION SNMPv2-TC


OBJECT IDENTIFIERS
Identifier Registration
qvs 1.3.6.1.4.1.21535
qvsReg 1.3.6.1.4.1.21535.1
qvsModules 1.3.6.1.4.1.21535.1.1
qvsGeneric 1.3.6.1.4.1.21535.2
qvsProducts 1.3.6.1.4.1.21535.3
qsa 1.3.6.1.4.1.21535.3.3
qsaProgramInformation 1.3.6.1.4.1.21535.3.3.1
qsaProgramData 1.3.6.1.4.1.21535.3.3.1.1
qsaProgramDescription 1.3.6.1.4.1.21535.3.3.1.1.1
qsaProgramControl 1.3.6.1.4.1.21535.3.3.1.1.2
qsaSystemInformation 1.3.6.1.4.1.21535.3.3.2
qsaStore 1.3.6.1.4.1.21535.3.3.2.1
qsaTerminal 1.3.6.1.4.1.21535.3.3.2.2
qsaServer 1.3.6.1.4.1.21535.3.3.2.3
qsaAccessControl 1.3.6.1.4.1.21535.3.3.2.4
qsaHistoryTables 1.3.6.1.4.1.21535.3.3.3
qsaOpStatsTables 1.3.6.1.4.1.21535.3.3.3.1
qsaProcessorUtilizationTables 1.3.6.1.4.1.21535.3.3.3.2
qsa4690SystemInformation 1.3.6.1.4.1.21535.3.3.6
qsa4690Store 1.3.6.1.4.1.21535.3.3.6.1
qsa4690Terminal 1.3.6.1.4.1.21535.3.3.6.2
qsa4690Controller 1.3.6.1.4.1.21535.3.3.6.3
qsa4690AccessControl 1.3.6.1.4.1.21535.3.3.6.4
qsaStoreGeneralInformation 1.3.6.1.4.1.21535.3.3.2.1.1
qsaStoreFileServices 1.3.6.1.4.1.21535.3.3.2.1.2
qsaStoreFileServicesInfo 1.3.6.1.4.1.21535.3.3.2.1.2.1
qsaStoreFileServicesData 1.3.6.1.4.1.21535.3.3.2.1.2.2
qsaClientSessionBranch 1.3.6.1.4.1.21535.3.3.2.4.1
qsaTerminalControl 1.3.6.1.4.1.21535.3.3.2.2.1
qsaDeviceInfo 1.3.6.1.4.1.21535.3.3.2.2.4
qsaTerminalMonitorControl 1.3.6.1.4.1.21535.3.3.2.2.5
qsaTerminalMonitorControlScalers 1.3.6.1.4.1.21535.3.3.2.2.5.1
qsaTerminalMonitorControlMultiTerm 1.3.6.1.4.1.21535.3.3.2.2.5.2
qsaTerminalMonitorTables 1.3.6.1.4.1.21535.3.3.2.2.5.3
qsaFilterControl 1.3.6.1.4.1.21535.3.3.2.2.5.4
qsa4690StoreGeneralInfo 1.3.6.1.4.1.21535.3.3.6.1.1
qsa4690StoreDiagInfo 1.3.6.1.4.1.21535.3.3.6.1.2
qsaDumpFileScalars 1.3.6.1.4.1.21535.3.3.6.1.2.1
qsaDumpFileTableData 1.3.6.1.4.1.21535.3.3.6.1.2.2
qsa4690TerminalControl 1.3.6.1.4.1.21535.3.3.6.2.1
qsa4690TerminalInfoAll 1.3.6.1.4.1.21535.3.3.6.2.2
qsa4690TerminalInfoSpecific 1.3.6.1.4.1.21535.3.3.6.2.3
qsa4690TerminalDeviceInfo 1.3.6.1.4.1.21535.3.3.6.2.4
qsa4690TerminalIOEvents 1.3.6.1.4.1.21535.3.3.6.2.2.3
qsa4690TermIOEventsFilterControl 1.3.6.1.4.1.21535.3.3.6.2.2.3.3
qsa4690TerminalDisplayInfo 1.3.6.1.4.1.21535.3.3.6.2.4.1
qsa4690TerminalKeyboardInfo 1.3.6.1.4.1.21535.3.3.6.2.4.2
qsa4690TerminalPrinterInfo 1.3.6.1.4.1.21535.3.3.6.2.4.3
qsaOpStatsCommon 1.3.6.1.4.1.21535.3.3.3.1.1
qsaOpStatsCommonTables 1.3.6.1.4.1.21535.3.3.3.1.2
qsaProcessorUtilizationCommon 1.3.6.1.4.1.21535.3.3.3.2.1
qsaProcessorUtilizationCommonTables 1.3.6.1.4.1.21535.3.3.3.2.2
qsa4690ControllerInfo 1.3.6.1.4.1.21535.3.3.6.3.1


Textual Conventions

QsaPosDeviceIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
InSight device index values.
A numeric value representing a particular device
on a pos terminal. Possible values are:
noDevice(0)
anDisplay(1)
anDisplay2(2)
anDisplay3(3)
cashDrawer(4)
cashDrawer2(5)
keyboard(6)
crPrinter(9)
scale(10)
scale(11)
vdisplay(17)
vdisplay2(18)
diPrinter(19)
sjPrinter(20)
ioProc(21)
tone(22)
indicLites(23)
mgrKey(24)
SYNTAX INTEGER
{ noDevice(0), anDisplay(1), anDisplay2(2),
andisplay3(3), cashDrawer(4), cashDrawer2(5),
keyboard(6), crPrinter(9), scale(10), scanner(11),
vdisplay(17), vdisplay2(18), diPrinter(19),
sjPrinter(20), ioProc(21), tone(22),
indicLites(23), mgrKey(24)
}

QsaPosDeviceMasks ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
A mask of bits representing a device or list of devices on
a pos terminal. Bit values correspond to QsaPosDeviceIndex
values and are created using the following equation:

devMask = 1 << (deviceIdx - 1)

The masks for each device are:
anDisplay
0x00000001

anDisplay2
0x00000002

anDisplay
0x00000004

cashDrawer
0x00000008

cashDrawer2
0x00000010

keyboard
0x00000020

msr
0x00000040

nvram
0x00000080

crPrinter
0x00000100

scale
0x00000200

scanner
0x00000400

scanner2
0x00000800

serial1
0x00001000

serial2
0x00002000

serial3
0x00004000

serial4
0x00008000

vdisplay
0x00010000

vdisplay2
0x00020000

diPrinter
0x00040000

sjPrinter
0x00080000

ioProc
0x00100000

tone
0x00200000

indicLites
0x00400000

mgrKey
0x00800000


SYNTAX Opaque (SIZE(4 | 8))


-- InSight i/o event types QsaPosIOEventType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
A numeric value representing a particular device i/o event.
Possible values are:
onlineOfflineEvent(0),
lostDataEvent(1),
displayRectangleEvent(2),
displayLinearEvent(3),
localDateTimeEvent(10),
cpuUtilizationEvent(11),
termInfoChangedEvent(12),
ctlrInfoChangedEvent(13),
termAgentStateChangeEvent(14),
termBitListChangeEvent(15),
opStatEvent(16),
cpuUtilRowEvent(17),
dumpEvent(18),
cashdEvent(400),
keyboardKeyPressEvent(600),
keyboardKeyMappingChangeEvent(602),
printerEvent4610(900),
printerEvent4610CR(901),
printerEventMod12CR(903),
printerEventMod34CR(906),
printerTableChangeEvent(920),
scaleEvent(1000),
scaleData(1001),
scanner1Event(1100),
scanner1Label(1101),
scannerData(1110),
vdisplayModeChgEvent(1700),
vdisplayCursorOnOffEvent(1701),
vdisplayGraphicsModeChgEvent(1702),
toneFreqDurationEvent(2200),
toneOnEvent(2201),
toneOffEvent(2202),
indicLiteEvent(2300)
mgrKeyEvent(2400)

Details for some events are as follows:
Parm1 eventOriginBits description:
Device events can originate from 4 places:
RealTime - from realtime device monitoring.
Current State - generated on query of current
device state.
Device History Queue - event comes from
history queue that is kept for each
device.
Global History Queue - event comes from
history queue that contains events from all
devices.
Bits 0x0300 of Parm1 are used to indicate the
event origin as follows:
0x0000 - real time
0x0100 - current state
0x0200 - device history queue
0x0300 - global history queue
onlineOfflineEvent(0) - terminal online/offline event
Parm1
offline(0)
online(1) - sent when terminal goes
from offline to online or from
online/monitorable to
online/notMonitorable
onlineMonitorable(2)
Data - none
Support status/limitations: supported in all versions

lostDataEvent(1) - i/o monitor events have been dropped.
Support status/limitations: supported in all versions

displayRectangleEvent(2) - update display rectangle
Parm1 -
charactersOnly(0x0001)
attributesOnly(0x0002)
charsAndAttributes(0x0004)
charsAndAttribute(0x0008)
applyToAll(0x0010) - data/attr for one
char position only. Apply to entire rect.
This flag is used in conjunction with
the other flags.
eventOriginBits(0x0300) - see description above.
eventFromJavaRedir(0x2000) - event is
from operation to andisplay device that
was redirected through java.
eventFromJavaPromptChangeListener(0x4000) -
event is result of java ioproc
PromptChangeListener event.
Data
vdisplay data octet = ulr.ulc.nr.nc.dd.dd...
-For chars and attributes: data is
ch.ch.ch....at.at.at....
-For chars and attribute: data is
ch.ch.ch...at
graphic data octet =
ulr.ulr.ulc.ulc.nr.nr.nc.nc.dd.dd....
Support status/limitations:
character data: supported in all versions graphics: future


displayLinearEvent(3) - display buffer looks like one dimensional array of bytes.
For example, 2x20 display is 40 byte array of bytes.
(all 2x20 display events are LinearEvents(3))
Parm1 - low byte is 0-based startOffset(0x00FF)
eventOriginBits(0x0300) - see description above.
Data - display characters
Support status/limitations: supported in all versions


localDateTimeEvent(10)
Parm1 -
term event (0x0001)
ctlr event (0x0002)
Data - date/time in DateAndTime format
without the octet length in front.
1-2 year 0..65536
(in network byte order)
3 month 1..12
4 day 1..31
5 hour 0..23
6 minutes 0..59
7 seconds 0..60
Support status/limitations: supported in all versions

cpuUtilizationEvent(11)
Parm1 - value from 0-100 indicating cpu
utilization
Data - none
Support status/limitations: supported in all versions

termInfoChangedEvent(12)
Parm1 -
termInfo1(0x0001)
termInfo2(0x0002)
Data - none
Support status/limitations: supported in all versions

ctlrInfoChangedEvent(13)
Parm1 -
ctlrInfo1(0x0001)
ctlrInfo2(0x0002)
Data - none
Support status/limitations: supported in all versions

termAgentStateChangeEvent(14)
Parm1 -
active(0x0001)
notActive(0x0002)
Data - none
Support status/limitations: supported in all versions

termBitListChangeEvent(15)
Parm1 - none
Data - none
Support status/limitations: supported in all versions

opStatEvent(16)
Parm1 - QsaPosDeviceIndex
Data -
rr.rr.yy.yy.mm.dd.hh.mm.ss.oc.oc.oc.oc.
ac.ac.si.si.am.am.as.as
where
rr.rr is the row
yy.yy.mm.dd.hh.mm.ss is DateTime of
of the start of the interval.
oc.oc.oc.oc is the Operations Count
ac.ac is the Adverse Count
si.si is the number of secs
for this interval
am.am is the Adverse Max Count
as.as is the number of seconds into the
interval that max count changed
Support status/limitations: supported in all versions

cpuUtilRowEvent(17)
Parm1 - none.
Data - rr.rr.yy.yy.mm.dd.hh.mm.ss.si.si.ag.mn.
ms.ms.mx.mz.mz
where
rr.rr is the row
yy.yy.mm.dd.hh.mm.ss is DateTime of
of the start of the interval.
si.si is the number of secs for this interval
ag is Average cpu use during interval
mn is Minimum cpu use during interval
ms.ms is The number of seconds into the
interval that min was changed.
mx is Maximum cpu use during interval
mz.mz is The number of seconds into the
interval that max was changed.
Support status/limitations:
terminals: supported in all versions
controllers: future

dumpEvent(18)
Parm1 - node. (ctlrId or terminal number)
Data - flags (one byte flags bit field)
0x0001 = dump started
0x0002 = dump ended
0x0004 = snapshot dump
0x0008 = full dump
Support status/limitations: future

cashdEvent(400)
Parm1 -
cashdOpen(0x0001)
cashd2Open(0x0002)
eventOriginBits(0x0300) - see description above.
Data - none
Support status/limitations: supported in all versions

keyboardKeypressEvent(600)
Parm1 -
ctrlKeyState(0x01) altKeyState(0x02)
shiftKeyState(0x04)
eventOriginBits(0x0300) - see description above.
remoteKeyPress (0x0400)
Data - keyboard keyswitch number (1 octet)
Support status/limitations: supported in all versions

keyboardKeyMappingChangeEvent(602)
Parm1 - none
Data -
String that specifies name of new or
current input state table.
A NULL string means that no input state
table is active.
Support status/limitations: supported in all versions


printerEvent4610(900)
Parm1 - eventOriginBits(0x0300) - see description above.
Data - Data is stream of 4610 print data
including 4610 ESC commands. May include
CR and DI data depending on application.
Support status/limitations: supported in all versions

printerEvent4610CR(901)
Parm1 - eventOriginBits(0x0300) - see description above.
Data - Data is stream of 4610 receipt print data including 4610 ESC commands.
Support status/limitations: not currently used

printerEventMod12CR(903)
Parm1 - eventOriginBits(0x0300) - see description above.
Data - Receipt printer data. Last byte is count of line feeds.
Support status/limitations: supported in all versions

printerEventMod34CR(906)
Parm1
- graphPrintData(0x0001)
- lineFeedsAreMotorSteps(0x0002)
- eventOriginBits(0x0300) - see description above.
Data - Receipt printer data. Last byte is count
of line feeds. Data may include Model
3/4 ESC commands.
Support status/limitations: supported in all versions

scaleData(1001)
Parm1 - none
Data - nnnn
where
nnnn is the weight in hundreths of a
pound. For instance, if data is 0x0110,
weight is 2.72 lbs.
Support status/limitations: supported in all versions

scannerLabel(1101)
Parm1 - none
Data - tttttt.lllllllllllllllll
where
ttttttis the label type (binary, 3 bytes,
values set by Input State Table
lllllllllllllllll is the label.
Support status/limitations: supported in all versions

scannerData(1110)
Parm1 - none
Data - Structure DevInfo_t in tagent.h
Off Len Fmt Des
0 1 BIN Type of Device
0x01-Handheld Scanner
0x02-Flatbed Scanner
1 1 BIN Manufacturer
0x01-NCR
2 10 ASC Model Number (ccccc0x00)
12 20 ASC Serial Number (ccccc0x00)
32 20 ASC Firmware level (ccccc0x00)
52 11 BIN SYNTAX DateAndTime
63 4 BIN Flags
Type == 0x02
0x00000001 - Scale Attached
0x00000002 - Scale Disabled
Support status/limitations: supported in all versions

vdisplayModeChgEvent(1700)
Parm1 - eventOriginBits(0x0300) - see description above.
Data - nr.nc
Support status/limitations: supported in all versions

vdisplayCursorOnOffEvent(1701)
Parm1 -
cursorOff(0x00), cursorOn(0x01)
eventOriginBits(0x0300) - see description above.
Data -
For cursor on:
rr.cc - row and colum of cursor location
Support status/limitations: supported in all versions

vdisplayGraphicsModeChgEvent(1702)
Parm1 - eventOriginBits(0x0300) - see description above.
Data - nr.nr.nc.nc
Support status/limitations: supported in all versions

toneFreqDuration(2200)
Parm1 -
volumeHigh(0x01)
eventOriginBits(0x0300) - see description above.
Data - freq, duration octets = ff.ff.dd.dd.dd.dd
(duration in milliseconds)
Support status/limitations: supported in all versions

toneOn(2201)
Parm1 -
volumeHigh(0x01)
eventOriginBits(0x0300) - see description above.
Data - freq octets = ff.ff
Support status/limitations: supported in all versions

toneOff(2202)
Parm1 - eventOriginBits(0x0300) - see description above.
Data - none
Support status/limitations: supported in all versions

indicLiteEvent(2300)
Parm1 -
waitOn(0x0001), offlineOn(0x0002),
msgOn(0x0004), 4thLightON(0x0008)
eventOriginBits(0x0300) - see description above.
Data - none
Support status/limitations: supported in all versions

keyboardMgrKeyEvent(2400)
Parm1 -
mgrKeyPhysicallyLocked(0x0001)
mgrKeySoftwareLocked(0x0002)
eventOriginBits(0x0300) - see description above.
Data - none
Support status/limitations: supported in all versions


SYNTAX INTEGER
onlineOfflineEvent(0),
lostDataEvent(1),
displayRectangleEvent(2),
displayLinearEvent(3),
localDateTimeEvent(10),
cpuUtilizationEvent(11),
termInfoChangedEvent(12),
ctlrInfoChangedEvent(13),
termAgentStateChangeEvent(14),
termBitListChangeEvent(15),
opStatEvent(16),
cpuUtilRowEvent(17),
dumpEvent(18),
cashdEvent(400),
keyboardKeyPressEvent(600),
keyboardKeyMappingChangeEvent(602),
printerEvent4610(900),
printerEvent4610CR(901),
printerEventMod12CR(903),
printerEventMod34CR(906),
printerTableChangeEvent(920),
scanner1Event(1100),
scanner1Label(1101),
scannerData(1110),
vdisplayModeChgEvent(1700),
vdisplayCursorOnOffEvent(1701),
vdisplayGraphicsModeChgEvent(1702),
toneFreqDurationEvent(2200),
toneOnEvent(2201),
toneOffEvent(2202),
indicLiteEvent(2300),
mgrKeyEvent(2400)



MIB Variables

qsaProgramDescription
Name Syntax Access Registration
qsaProgramName Octet String read-only 1.3.6.1.4.1.21535.3.3.1.1.1.1
qsaProgramVersion Octet String read-only 1.3.6.1.4.1.21535.3.3.1.1.1.2
qsaProgramCompilationDate Octet String read-only 1.3.6.1.4.1.21535.3.3.1.1.1.3
qsaProgramUpTime Timeticks read-only 1.3.6.1.4.1.21535.3.3.1.1.1.4
qsaProgramContact Octet String read-write 1.3.6.1.4.1.21535.3.3.1.1.1.5
qsaProgramActiveDate Octet String read-only 1.3.6.1.4.1.21535.3.3.1.1.1.6
qsaProgramDatabaseCreateDate Octet String read-only 1.3.6.1.4.1.21535.3.3.1.1.1.7
qsaProgramActiveClientCount Integer32 read-only 1.3.6.1.4.1.21535.3.3.1.1.1.8

qsaProgramControl
Name Syntax Access Registration
qsaProgramControlReInitializeQSA Octet String read-write 1.3.6.1.4.1.21535.3.3.1.1.2.1
qsaProgramControlTimeFormat Enumerated read-write 1.3.6.1.4.1.21535.3.3.1.1.2.2
qsaProgramControlCinfo1RefreshRate Integer32 read-write 1.3.6.1.4.1.21535.3.3.1.1.2.6
qsaProgramControlCinfo2RefreshRate Integer32 read-write 1.3.6.1.4.1.21535.3.3.1.1.2.7
qsaProgramControlTerminalAgentsEnabledState Enumerated read-only 1.3.6.1.4.1.21535.3.3.1.1.2.8

qsaStoreGeneralInformation
Name Syntax Access Registration
qsaStoreDescription Octet String read-write 1.3.6.1.4.1.21535.3.3.2.1.1.1
qsaStoreNumber Integer Range read-only 1.3.6.1.4.1.21535.3.3.2.1.1.2
qsaStoreAddress Octet String read-write 1.3.6.1.4.1.21535.3.3.2.1.1.3
qsaStorePhone Octet String read-write 1.3.6.1.4.1.21535.3.3.2.1.1.4
qsaStoreManager Octet String read-write 1.3.6.1.4.1.21535.3.3.2.1.1.5
qsaStorePrimaryCAgentNodeID Octet String read-only 1.3.6.1.4.1.21535.3.3.2.1.1.6
qsaStoreBackupCAgentNodeID Octet String read-only 1.3.6.1.4.1.21535.3.3.2.1.1.7

qsaStoreFileServicesInfo
Name Syntax Access Registration
qsaStoreFileServicesFileName Octet String read-write 1.3.6.1.4.1.21535.3.3.2.1.2.1.1
qsaStoreFileServicesFileSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.2.1.2.1.2
qsaStoreFileServicesFileTimeStamp Octet String read-only 1.3.6.1.4.1.21535.3.3.2.1.2.1.3
qsaStoreFileServicesFileBlockSize Integer Range read-write 1.3.6.1.4.1.21535.3.3.2.1.2.1.4

Table: qsaStoreFileServicesDataTable
This table is used to retrieve blocks of a file.
Support status/limitations: supported in all versions

QsaStoreFileServicesDataTableEntry
Name Syntax Access Registration
qsaStoreFileServicesDataBlockNum cSYNuint32 934 1.3.6.1.4.1.21535.3.3.2.1.2.2.1.1.1
qsaStoreFileServicesDataBlock Octet String read-only 1.3.6.1.4.1.21535.3.3.2.1.2.2.1.1.2

qsaClientSessionBranch
Name Syntax Access Registration
qsaClientSessionStartTime Octet String read-only 1.3.6.1.4.1.21535.3.3.2.4.1.1
qsaClientSessionUserName Octet String read-write 1.3.6.1.4.1.21535.3.3.2.4.1.2
qsaClientSessionPassword Octet String read-write 1.3.6.1.4.1.21535.3.3.2.4.1.3

qsaTerminalMonitorControlScalers
Name Syntax Access Registration
qsaTerminalMonitorControlEventMode Enumerated read-write 1.3.6.1.4.1.21535.3.3.2.2.5.1.1

qsaTerminalMonitorControlMultiTerm
Name Syntax Access Registration
qsaTerminalMonitorControlMultiTermTerminalsToMonitor Octet String read-write 1.3.6.1.4.1.21535.3.3.2.2.5.2.1
qsaTerminalMonitorControlMultiTermDevicesToMonitor cSYNopaque 152 1.3.6.1.4.1.21535.3.3.2.2.5.2.2
qsaTerminalMonitorControlMultiTermSystemDisplayMonitor Enumerated read-write 1.3.6.1.4.1.21535.3.3.2.2.5.2.3
qsaTerminalMonitorControlMultiTermDisplayRectangle Octet String read-write 1.3.6.1.4.1.21535.3.3.2.2.5.2.4

Table: qsaTerminalMonitorControlTable
This table is used to control terminal monitoring by a
client on a per-terminal basis. A terminal may be monitored
only or monitored and remotely controlled. Remote control
may not be allowed by certain configurations.
Once monitoring is enabled for a terminal, device events can
be retrieved from the event monitor table
(qsaEventMonitorTable). When monitoring is enabled
appropriate current state and history information is first
added to the i/o event queue. For example, the current
display contents are added and crPrinter previous print
commands are added if available. This table is indexed
by TermNum.
Support status/limitations: supported in all versions

QsaTerminalMonitorControlTableEntry
Name Syntax Access Registration
qsaTerminalMonitorControlTermNum Integer Range read-only 1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.1
qsaTerminalMonitorControlMode Enumerated read-write 1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.2
qsaTerminalMonitorControlDevicesToMonitor cSYNopaque 152 1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.3
qsaTerminalMonitorControlExclusiveAccess Enumerated read-write 1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.4
qsaTerminalMonitorControlEventOriginControl Integer32 read-write 1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.5

Table: qsaFilterControlAllowedDevicesTable
This table is populated directly from the CDI input file
entries that specify which devices are allowed to be
filtered by client applications. The CDI file entries
specify a list of terminals allowed for each device
allowed to be filtered. This table is indexed by
DeviceIdx.
Support status/limitations:
future feature targeted for 0.99.0.30

QsaFilterControlAllowedDevicesTableEntry
Name Syntax Access Registration
qsaFilterControlAllowedDevicesTableDeviceIndex Enumerated read-only 1.3.6.1.4.1.21535.3.3.2.2.5.4.1.1.1
qsaFilterControlAllowedDevicesTableTerminalBitList Octet String read-only 1.3.6.1.4.1.21535.3.3.2.2.5.4.1.1.2

Table: qsaFilterControlAllowedApplicationsTable
This table is populated directly from the CDI input file
entries that specify applications that are allowed to
perform device filtering.
Support status/limitations:
future feature targeted for 0.99.0.30

QsaFilterControlAllowedApplicationsTableEntry
Name Syntax Access Registration
qsaFilterControlAllowedApplicationsTableIndex Integer Range read-only 1.3.6.1.4.1.21535.3.3.2.2.5.4.2.1.1
qsaFilterControlAllowedApplicationsTableName Octet String read-only 1.3.6.1.4.1.21535.3.3.2.2.5.4.2.1.2

Table: qsaFilterControlClientTable
This table contains an entry for each device that the
client is filtering.
Support status/limitations:
future feature targeted for 0.99.0.30

QsaFilterControlClientTableEntry
Name Syntax Access Registration
qsaFilterControlClientTableDeviceIndex Enumerated read-write 1.3.6.1.4.1.21535.3.3.2.2.5.4.3.1.1
qsaFilterControlClientTableFilteringOrder Integer Range read-write 1.3.6.1.4.1.21535.3.3.2.2.5.4.3.1.2
qsaFilterControlClientTableTerminalList Octet String read-write 1.3.6.1.4.1.21535.3.3.2.2.5.4.3.1.3

qsa4690StoreGeneralInfo
Name Syntax Access Registration
qsa4690StoreOSVersion Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.1.1
qsa4690StoreApplication Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.1.1.2
qsa4690StoreCSFVersion Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.1.3
qsa4690StoreNumConfiguredCtlrs Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.1.1.4
qsa4690StoreConfiguredCtlrIDs Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.1.5
qsa4690StoreThisCtlrNodeID Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.1.6

qsaDumpFileScalars
Name Syntax Access Registration
qsaDumpArchivingActive Enumerated read-write 1.3.6.1.4.1.21535.3.3.6.1.2.1.1
qsaDumpNumberTerminalArchives Integer Range read-write 1.3.6.1.4.1.21535.3.3.6.1.2.1.2
qsaDumpNumberControllerArchives Integer Range read-write 1.3.6.1.4.1.21535.3.3.6.1.2.1.3

Table: qsaDumpArchiveTable
This table contains the detailed data for archived terminal
and controller dumps. This table is indexed by index.
Support status/limitations:
future feature targeted for 0.99.0.??

QsaDumpArchiveTableEntry
Name Syntax Access Registration
qsaDumpArchiveIndex Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.1
qsaDumpArchiveLocationNode cSYNuint32 1703 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.2
qsaDumpArchiveSourceNode cSYNuint32 1716 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.3
qsaDumpArchiveDataType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.4
qsaDumpArchiveUniqueId Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.5
qsaDumpArchiveStartDateTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.6
qsaDumpArchiveEndDateTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.7
qsaDumpArchiveAvailableInfo SYNuint32 read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.8
qsaDumpArchiveFileList Octet String read-only 1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.9

Table: qsa4690TerminalListTable
Provides list of terminals that are part of the following
lists: defined, known, online, and monitorable. Table is
indexed by qsa4690TerminalListType. Defined terminals are
terminals that are defined in any of 4690's terminal load
definition databases (legacy or generic). Known terminals
are terminals which have been seen online by an InSight
controller agent. Customers may select not to run the
terminal agent in certain terminals. Online terminals are
terminals that are currently online. Monitorable
terminals are online terminals that are currently running
the terminal agent and which have not had monitoring
disabled. Data provided is from a store level view (all
terminals in the store) - not just those attached to a
particular controller.

Notes:
Defined Terminals - at any instant the information
will usually, but not always, match the actual 4690
configuration information. InSight periodically
monitors the 4690 configuration database files for
changes by remembering and comparing file
date/time/size information. Its default rate for
checking for changes is once every hour.
Support status/limitations: supported in all versions

Qsa4690TerminalListTableEntry
Name Syntax Access Registration
qsa4690TerminalListType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.2.1.1.1
qsa4690TerminalListChangeCounter Counter32 read-only 1.3.6.1.4.1.21535.3.3.6.2.2.1.1.2
qsa4690TerminalListCount SYNuint32 read-only 1.3.6.1.4.1.21535.3.3.6.2.2.1.1.3
qsa4690TerminalListBitList Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.2.1.1.4

Table: qsa4690TerminalList2Table
This table supplements qsa4690TerminalListTable. It
Provides terminal numbers of defined, known, online, and
monitorable terminals without having to parse bits.
Table is indexed by qsa4690TerminalListType and
terminal number. Normally, this table will be retrieved
using getbulk or getnext to retrieve a full list of terminals
of whatever type.
Support status/limitations: future

Qsa4690TerminalList2TableEntry
Name Syntax Access Registration
qsa4690TerminalList2TableTermNum Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.2.2.1.1

qsa4690TerminalIOEvents
Name Syntax Access Registration
qsa4690DeviceIOSendEvent SYNopaque read-write 1.3.6.1.4.1.21535.3.3.6.2.2.3.1

Table: qsa4690DeviceIOSysCmdTable
Table containing system command events to be sent to
terminal(s). The event is actually sent to the terminal
when a Set is performed on the qsa4690DeviceIOSysCmd.
Indexed by Termnum.
Support status/limitations: supported in all versions

Qsa4690DeviceIOSysCmdEntry
Name Syntax Access Registration
qsa4690DeviceIOSysCmdTermNum Integer Range not-accessible 1.3.6.1.4.1.21535.3.3.6.2.2.3.2.1.1
qsa4690DeviceIOSysCmd Enumerated read-write 1.3.6.1.4.1.21535.3.3.6.2.2.3.2.1.2

qsa4690TermIOEventsFilterControl
Name Syntax Access Registration
qsa4690TermIOEventsFilterControlSendEvent SYNopaque read-write 1.3.6.1.4.1.21535.3.3.6.2.2.3.3.1

Table: qsa4690EventMonitorTable
Table containing events which are being monitored. Each
row in the table represents an event for a particular device
or system event on a particlar terminal or controller. The
table is typically accessed using GET_BULK. This table is
anchored to a client session. It is created when a user
activates monitoring or when it first accesses the table.
It is deleted when a client session terminates. Each row in
the table is created as device i/o happens. A row is
deleted automatically after either qsa4690EventMonitor-
EventData or qsa4690EventMonitor AltEventData is accessed.
Support status/limitations: supported in all versions

Qsa4690EventMonitorEntry
Name Syntax Access Registration
qsa4690EventMonitorEventIndex Integer Range not-accessible 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.1
qsa4690EventMonitorEventSourceNode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.2
qsa4690EventMonitorEventTimeStamp Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.3
qsa4690EventMonitorEventDeviceIndex Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.4
qsa4690EventMonitorEventType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.5
qsa4690EventMonitorEventParm1 SYNuint32 read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.6
qsa4690EventMonitorEventSeqNum SYNuint32 read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.7
qsa4690EventMonitorEventData SYNopaque read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.8
qsa4690EventMonitorEventAltData SYNopaque read-only 1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.9

Table: qsa4690KnownTerminalTable
Provides general information for terminals that have been
seen active in this store since InSight was first activated
(or since its database was reset). The information in this
table is gathered by InSight the InSight controller agent
and is available for all terminals including those that
are not running the InSight terminal agent. Note that
additional information on terminals is available in the
qsa4690TerminalVPDTable. Table is indexed using qsa4690-
KnownTerminalTermNum.
Support status/limitations: supported in all versions

Qsa4690KnownTerminalTableEntry
Name Syntax Access Registration
qsa4690KnownTerminalTermNum Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.1
qsa4690KnownTerminalLoadDefDatabase Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.2
qsa4690KnownTerminalType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.3
qsa4690KnownTerminalLastOnlineTimeStamp Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.4
qsa4690KnownTerminalLastOfflineTimeStamp Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.5
qsa4690KnownTerminalOnlineSeconds Counter32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.6
qsa4690KnownTerminalDeviceGroup Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.7
qsa4690KnownTerminalDefaultApp1 Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.8
qsa4690KnownTerminalDefaultJApp1 Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.1.1.9

Table: qsa4690TerminalInfo1Table
Table containing terminal information reported by the
InSight terminal agent. Each row of the table correlates
to a particular terminal. The information (columns)
contained in this table is information that changes
relatively infrequently in a typical operational
environment. Indexed by TermNum.
Support status/limitations: supported in all versions

Qsa4690TerminalInfo1Entry
Name Syntax Access Registration
qsa4690TerminalInfo1ActiveState Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.1
qsa4690TerminalInfo1AgentCapabilities Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.2
qsa4690TerminalInfo1LastActiveDateTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.3
qsa4690TerminalInfo1SystemManufacturer Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.4
qsa4690TerminalInfo1SystemProductName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.5
qsa4690TerminalInfo1SystemModelName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.6
qsa4690TerminalInfo1SystemSerialNumber Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.7
qsa4690TerminalInfo1SystemBiosVersion Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.8
qsa4690TerminalInfo1CpuModel Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.15
qsa4690TerminalInfo1CpuSpeed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.16
qsa4690TerminalInfo1TotalMemory Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.17
qsa4690TerminalInfo1DiskCSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.18
qsa4690TerminalInfo1DiskQSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.19
qsa4690TerminalInfo1DiskXSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.20
qsa4690TerminalInfo1DiskYSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.21
qsa4690TerminalInfo1AgentIPLTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.22
qsa4690TerminalInfo1SystemDisplayIdx Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.23
qsa4690TerminalInfo1KeybName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.24
qsa4690TerminalInfo1PhysPrinter Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.25
qsa4690TerminalInfo1PhysAndisplay Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.26
qsa4690TerminalInfo1PhysAndisplay2 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.27
qsa4690TerminalInfo1PhysAndisplay3 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.28
qsa4690TerminalInfo1PhysVdisplay Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.29
qsa4690TerminalInfo1PhysVdisplay2 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.30
qsa4690TerminalInfo1PhysCashD Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.31
qsa4690TerminalInfo1PhysCashD2 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.32
qsa4690TerminalInfo1PhysNVRam Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.33
qsa4690TerminalInfo1PhysSerial1 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.34
qsa4690TerminalInfo1PhysSerial2 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.35
qsa4690TerminalInfo1PhysSerial3 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.36
qsa4690TerminalInfo1PhysSerial4 Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.37
qsa4690TerminalInfo1PhysScanner Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.38
qsa4690TerminalInfo1PhysScale Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.39
qsa4690TerminalInfo1PhysKeyboard Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.40
qsa4690TerminalInfo1NVRamSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.41
qsa4690TerminalInfo1KeyboardIBMType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.42
qsa4690TerminalInfo1PrinterType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.43
qsa4690TerminalInfo14610ECLvl Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.44
qsa4690TerminalInfo14610Model Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.45
qsa4690TerminalInfo1TcpipAddress0 OID read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.46
qsa4690TerminalInfo1MacAddress0 Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.47
qsa4690TerminalInfo1TccType Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.48
qsa4690TerminalInfo1JavaSupported Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.49
qsa4690TerminalInfo1JavaDeviceRedirectionInfo Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.2.1.50

Table: qsa4690TerminalInfo2Table
Table containing information about terminals. Each row of
the table correlates to a particular terminal. The
information (columns) contained in this table is
information that changes relatively frequently in a typical
operational environment. Index by TermNum
Support status/limitations: supported in all versions

Qsa4690TerminalInfo2Entry
Name Syntax Access Registration
qsa4690TerminalInfo2PrimaryController Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.1
qsa4690TerminalInfo2ConnectedToController Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.2
qsa4690TerminalInfo2FreeMemory Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.3
qsa4690TerminalInfo2UsedMemory Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.4
qsa4690TerminalInfo2ManagerKeyPosition Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.5
qsa4690TerminalInfo2ManagerKeySoftPosition Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.6
qsa4690TerminalInfo2WaitLight Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.7
qsa4690TerminalInfo2MsgLight Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.8
qsa4690TerminalInfo2OfflineLight Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.9
qsa4690TerminalInfo24thLight Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.10
qsa4690TerminalInfo2DiskCUsed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.11
qsa4690TerminalInfo2DiskCFree Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.12
qsa4690TerminalInfo2DiskQUsed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.13
qsa4690TerminalInfo2DiskQFree Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.14
qsa4690TerminalInfo2DiskXUsed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.15
qsa4690TerminalInfo2DiskXFree Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.16
qsa4690TerminalInfo2DiskYUsed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.17
qsa4690TerminalInfo2DiskYFree Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.18
qsa4690TerminalInfo2CurrentApp Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.19
qsa4690TerminalInfo2CashDrawer1Position Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.20
qsa4690TerminalInfo2CashDrawer2Position Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.21
qsa4690TerminalInfo2ApplicationActive Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.22
qsa4690TerminalInfo2CurrentInputStateTable Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.3.3.1.23

Table: qsa4690DisplayTable
Table containing information about display devices. Each
row of the table correlates to a display on a particular
terminal (host). The table is indexed by terminal number
and the display index for that terminal.
Support status/limitations: supported in all versions

Qsa4690DisplayEntry
Name Syntax Access Registration
qsa4690DisplayDeviceIndex Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.1
qsa4690DisplayType Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.2
qsa4690DisplayNumRows Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.3
qsa4690DisplayNumCols Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.4
qsa4690DisplayDataChangeCounter Counter32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.5
qsa4690DisplayIsSystem Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.6
qsa4690DisplayTouchScreenFeature Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.7
qsa4690DisplayWithThreeTrackMagReader Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.8
qsa4690DisplayUsedAsTwoTrackReader Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.9
qsa4690DisplayCapableOfReadingTrackOneTwo Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.10
qsa4690DisplayResolution Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.11
qsa4690DisplayJavaGraphicsSupported Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.12
qsa4690DisplayMonitorRectangle Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.13

Table: qsa4690KeyboardDefsGlobalKeymapTable
Table containing information about keyboard layouts. This
table contains information that is not key-specific.
qsa4690KeyboardDefsPerKeyTable contains key-specific
information. Each row of this table correlates to a
particular keyboard type, keyboard name, and
4690 keyboard definition record (keymap).
It is indexed by a Terminal Number.
Note:
the controller agent uses the terminal number to retrieve
keyboard type and the keyboard definition record name.
Support status/limitations: supported in all versions

Qsa4690KeyboardDefsGlobalKeymapTableEntry
Name Syntax Access Registration
qsa4690KeyboardDefsGlobalKeymapUniqueID Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.1.1.1

Table: qsa4690KeyboardDefsPerKeyTable
Table containing information about keyboard layouts. This
table contains information that is key-specific.
qsa4690KeyboardDefsGlobalTable contains information
that is global or not key-specific. Each row of this table
corresponds to a keyswitch number for a particular 4690
keyboard definition. This table is indexed by
a combination of terminal number and key switch number.
Support status/limitations: supported in all versions

Qsa4690KeyboardDefsPerKeyTableEntry
Name Syntax Access Registration
qsa4690KeyboardDefsPerKeySwitchNumber Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.1
qsa4690KeyboardDefsPerKeyPairedWithSwitchNumbers Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.2
qsa4690KeyboardDefsPerKeyNormalFunctionCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.3
qsa4690KeyboardDefsPerKeyShiftFunctionCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.4
qsa4690KeyboardDefsPerKeyCtrlFunctionCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.5
qsa4690KeyboardDefsPerKeyAltFunctionCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.6

Table: qsa4690KeyboardDefsGlobalStateTable
Table containing information about State Table Labels. This
table contains information that is not key-specific.
qsa4690KeyboardDefsPerKeyTable contains key-specific
information. Each row of this table correlates to a
particular Input State Table.
It is indexed by a state table name.
Support status/limitations: supported in all versions

Qsa4690KeyboardDefsGlobalStateTableEntry
Name Syntax Access Registration
qsa4690KeyboardDefsGlobalStateTableName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.3.1.1
qsa4690KeyboardDefsGlobalStateTableUniqueID Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.3.1.2

Table: qsa4690KeyboardFunctionCodeLabelTable
Table containing information for use by manager applications
that display and label keyboards. This table provides a
mapping between 4690 Keyboard Function Codes and key
labeling attributes such as text label, abbreviation,
key color, etc. Each row of this table corresponds to a
4690 function code value for a particular 4690
input state table definition. This table is indexed by
state table name and keystroke function code. InSight will
generate some default labels for well-known function codes
for well-known applications. Applications may set values in
this table.
Support status/limitations: supported in all versions

Qsa4690KeyboardFunctionCodeLabelTableEntry
Name Syntax Access Registration
qsa4690KeyboardFunctionCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.1
qsa4690KeyboardFunctionCodeLabelText Octet String read-write 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.2
qsa4690KeyboardFunctionCodeLabelAbbrev Octet String read-write 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.3
qsa4690KeyboardFunctionCodeLabelHelpText Octet String read-write 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.4
qsa4690KeyboardFunctionCodeLabelTextColor Integer32 read-write 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.5
qsa4690KeyboardFunctionCodeLabelBackgroundColor Integer32 read-write 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.6
qsa4690KeyboardFunctionCodeLabelAlphaChar Octet String read-write 1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.7

Table: qsa4690KeyboardScanCodeLabelTable
Table containing information for use by manager applications
that display and label scanCodes. This table provides a
mapping between 4690 Keyboard Scan Codes and key
labeling abbreviated text, Each row of this table
corresponds to a Scan Code value for the current 4690
input state table for the specified terminal number.
This table was originally added for use by the InSight
dump formatter.
This table is indexed by terminalNumber and scanCode.
Support status/limitations: supported in all versions

Qsa4690KeyboardScanCodeLabelTableEntry
Name Syntax Access Registration
qsa4690KeyboardScanCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.5.1.1
qsa4690KeyboardScanCodeFuncCode Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.5.1.2
qsa4690KeyboardScanCodeLabelAbbrev Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.4.2.5.1.3

Table: qsa4690PrinterTable
Table containing information about printer devices. Each
row of the table correlates to a printer on a particular
terminal (host). The table is indexed by terminal number
and the printer device index for that terminal.
Support status/limitations: supported in all versions

Qsa4690PrinterEntry
Name Syntax Access Registration
qsa4690PrinterDeviceIndex Integer Range read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.1
qsa4690PrinterCapabilities Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.2
qsa4690PrinterReportingCapabilities Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.3
qsa4690PrinterSerialNumber Octet String read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.4
qsa4690PrinterCrPaperCuts Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.5
qsa4690PrinterCrCharsPrinted Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.6
qsa4690PrinterCrMotorSteps SYNcntr64 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.7
qsa4690PrinterCrCoverOpens Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.8
qsa4690PrinterCrFailedCuts Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.9
qsa4690PrinterDiCharsPrinted Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.10
qsa4690PrinterDiPaperFeedMotorSteps SYNcntr64 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.11
qsa4690PrinterDiTransportMotorStarts Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.12
qsa4690PrinterHomeErrors Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.13
qsa4690PrinterDiCoverOpens Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.14
qsa4690PrinterDiFormInserts Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.15
qsa4690PrinterMicrReads Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.16
qsa4690PrinterMicrHighInterferenceReads Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.17
qsa4690PrinterMicrFailedReads Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.18
qsa4690PrinterCheckFlips Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.19
qsa4690PrinterCheckFlipFailures Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.20

Table: qsaOpStatsMonitorControlTable
This table is used to control operational statistics
monitoring by a client on a per-terminal basis.
This table is indexed by TermNum (generically called Node).
Support status/limitations: supported in all versions

QsaOpStatsMonitorControlTableEntry
Name Syntax Access Registration
qsaOpStatsMonitorControlNode cSYNuint32 4522 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.1
qsaOpStatsMonitorControlHistoryInterval Octet String read-only 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.2
qsaOpStatsMonitorControlHistorySize Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.3
qsaOpStatsMonitorControlLogHistoryData Enumerated read-only 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.4
qsaOpStatsMonitorControlMonitorableDevices cSYNopaque 152 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.5
qsaOpStatsMonitorControlDevicesToMonitor cSYNopaque 152 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.6
qsaOpStatsMonitorControlRow1EventFrequency Integer Range read-write 1.3.6.1.4.1.21535.3.3.3.1.2.1.1.7

Table: qsaOpStatsTable
Operational Statistics Table.
Support status/limitations:
table is supported in all versions but see individual
variables for details

QsaOpStatsEntry
Name Syntax Access Registration
qsaOpStatsNode cSYNuint32 4679 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.1
qsaOpStatsEntity cSYNuint32 4691 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.2
qsaOpStatsRowIndex cSYNuint32 4700 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.3
qsaOpStatsIntervalName Octet String read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.4
qsaOpStatsIntervalStartTime Octet String read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.5
qsaOpStatsIntervalLength Timeticks read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.6
qsaOpStatsEventCount Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.7
qsaOpStatsAdverseCount Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.8
qsaOpStatsAdverseCountMaximum Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.9
qsaOpStatsAdverseCountMaxChanged Octet String read-only 1.3.6.1.4.1.21535.3.3.3.1.2.2.1.10

Table: qsaOpStatsAdverseEventInfoTable
Adverse event information table. Table contains information
for the 10 most recent adverse events.
Support status/limitations: future

QsaOpStatsAdverseEventInfoEntry
Name Syntax Access Registration
qsaOpStatsAdverseEventInfoIndex cSYNuint32 4812 1.3.6.1.4.1.21535.3.3.3.1.2.3.1.1
qsaOpStatsAdverseEventInfoTime Octet String read-only 1.3.6.1.4.1.21535.3.3.3.1.2.3.1.2
qsaOpStatsAdverseEventInfoType Enumerated read-only 1.3.6.1.4.1.21535.3.3.3.1.2.3.1.3
qsaOpStatsAdverseEventInfoData Octet String read-only 1.3.6.1.4.1.21535.3.3.3.1.2.3.1.4

Table: qsaProcessorUtilizationControlTable
This table is used to control processor utilization tracking
by a client on a per-node basis. This table is indexed by
node.
Support status/limitations:
terminals only and read-only: supported in all versions
controller and read-write: future

QsaProcessorUtilizationControlTableEntry
Name Syntax Access Registration
qsaProcessorUtilizationControlNode cSYNuint32 4972 1.3.6.1.4.1.21535.3.3.3.2.2.1.1.1
qsaProcessorUtilizationControlPollingInterval Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.1.1.2
qsaProcessorUtilizationControlHistoryInterval Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.1.1.3
qsaProcessorUtilizationControlHistorySize Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.1.1.4
qsaProcessorUtilizationControlLogHistoryData Enumerated read-only 1.3.6.1.4.1.21535.3.3.3.2.2.1.1.5

Table: qsaProcessorUtilizationTable
Processor Utilization table.
Support status/limitations:
terminals: future. Processor Util EVENTS are supported.
controller: future. Processor Util EVENTS are supported.

QsaProcessorUtilizationEntry
Name Syntax Access Registration
qsaProcessorUtilizationNode cSYNuint32 5116 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.1
qsaProcessorUtilizationRowIndex cSYNuint32 5130 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.2
qsaProcessorUtilizationIntervalName Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.3
qsaProcessorUtilizationIntervalStartTime Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.4
qsaProcessorUtilizationIntervalLength Timeticks read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.5
qsaProcessorUtilizationIdle Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.6
qsaProcessorUtilizationBusy Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.7
qsaProcessorUtilizationIdleMinimum Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.8
qsaProcessorUtilizationIdleMinChanged Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.9
qsaProcessorUtilizationBusyMinimum Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.10
qsaProcessorUtilizationBusyMinChanged Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.11
qsaProcessorUtilizationIdleMaximum Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.12
qsaProcessorUtilizationIdleMaxChanged Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.13
qsaProcessorUtilizationBusyMaximum Integer32 read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.14
qsaProcessorUtilizationBusyMaxChanged Octet String read-only 1.3.6.1.4.1.21535.3.3.3.2.2.2.1.15

Table: qsa4690ControllerInfo1Table
Table containing information about controllers. Each row of
the table correlates to a particular controller. The
information (columns) contained in this table is
information that changes relatively infrequently in a typical
operational environment. Index by NodeId (CC, DD, etc)
Support status/limitations: supported in all versions

Qsa4690ControllerInfo1Entry
Name Syntax Access Registration
qsa4690ControllerInfo1NodeId Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.1
qsa4690ControllerInfo1ActiveState Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.2
qsa4690ControllerInfo1LastActiveDateTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.3
qsa4690ControllerInfo1SystemManufacturer Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.4
qsa4690ControllerInfo1SystemProductName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.5
qsa4690ControllerInfo1SystemModelName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.6
qsa4690ControllerInfo1SystemSerialNumber Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.7
qsa4690ControllerInfo1SystemBiosVersion Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.8
qsa4690ControllerInfo1CpuModel Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.9
qsa4690ControllerInfo1CpuSpeed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.16
qsa4690ControllerInfo1TotalMemory Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.17
qsa4690ControllerInfo1DiskCSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.18
qsa4690ControllerInfo1DiskDSize Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.19
qsa4690ControllerInfo1TcpipAddress0 OID read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.20
qsa4690ControllerInfo1TcpipAddress1 OID read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.21
qsa4690ControllerInfo1MacAddress0 Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.22
qsa4690ControllerInfo1MacAddress1 Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.23
qsa4690ControllerInfo1MCFConfiguredMasterRole Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.24
qsa4690ControllerInfo1MCFConfiguredFileServerRole Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.25
qsa4690ControllerInfo1MCFActingMasterRole Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.26
qsa4690ControllerInfo1MCFActingFileServerRole Enumerated read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.27
qsa4690ControllerInfo1AgentIPLTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.30
qsa4690ControllerInfo1HostName Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.1.1.31

Table: qsa4690ControllerInfo2Table
Table containing information about controllers. Each row of
the table correlates to a particular controller. The
information (columns) contained in this table is
information that changes relatively frequently in a typical
operational environment. Index by NodeId (CC, DD, etc)
Support status/limitations: supported in all versions

Qsa4690ControllerInfo2Entry
Name Syntax Access Registration
qsa4690ControllerInfo2FreeMemory Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.2
qsa4690ControllerInfo2UsedMemory Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.3
qsa4690ControllerInfo2DiskCFree Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.4
qsa4690ControllerInfo2DiskCUsed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.5
qsa4690ControllerInfo2DiskDFree Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.6
qsa4690ControllerInfo2DiskDUsed Integer32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.7
qsa4690ControllerInfo2LocalTime Octet String read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.8
qsa4690ControllerInfo2CpuUtilization Gauge32 read-only 1.3.6.1.4.1.21535.3.3.6.3.1.2.1.9

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)