MIB MODULE DETAILS INSIGHT-QVS-STORE-ACCESS-MIB

qsaProgramName 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.1
Access:        read-only
Reference:     None
Description:
Official name of the InSight Agent program.
Support status/limitations: supported in all versions

qsaProgramVersion 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.2
Access:        read-only
Reference:     None
Description:
Version information of the InSight Agent program.
Support status/limitations: supported in all versions

qsaProgramCompilationDate 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.3
Access:        read-only
Reference:     None
Description:
Date and time when the current agent was compiled.
Support status/limitations: supported in all versions

qsaProgramUpTime 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.4
Access:        read-only
Reference:     None
Description:
Time (in hundredths of a second) since the
QSA Agent program was last re-initialized.
Support status/limitations: supported in all versions

qsaProgramContact 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.5
Access:        read-write
Reference:     None
Description:
Textual identification of the contact person for the
InSight product on this store system and information on
how to contact this person.
Support status/limitations: supported in all versions

qsaProgramActiveDate 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.6
Access:        read-only
Reference:     None
Description:
Date and time when InSight first became active in this
store.
Support status/limitations: supported in all versions

qsaProgramDatabaseCreateDate 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.7
Access:        read-only
Reference:     None
Description:
Date and time when InSight generated its database from
scratch for this store. InSight generates its database
from scratch in under the following conditions: no database
(qsadb.dat) was found, the found database did not match
the current store number, or the found database was so
corrupt that InSight could not find any trustworthy
information. InSight may from time-to-time, change the
format of its database record and largely re-generate
the database but it will migrate some basic information
including the list of known terminals and the database
create date.
Support status/limitations: supported in all versions

qsaProgramActiveClientCount 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.1.8
Access:        read-only
Reference:     None
Description:
Count of active client sessions for this agent.
Support status/limitations: supported in all versions

qsaProgramControlReInitializeQSA 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.2.1
Access:        read-write
Reference:     None
Description:
Time InSight Controller Agent was last initialized.
A SET to this will reinitialize the program. New
command-line parameters can optionally be provided
on the set. If no value is passed on the set (or if
the 'last initialized' time string is passed), the
program will reinitialize using its original command-
line parameters.
Support status/limitations: supported in all versions

qsaProgramControlTimeFormat 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.2.2
Access:        read-write
Reference:     None
Description:
Controls whether TimeStamps are formatted and returned as
OctetStrings or DisplayStrings.
Support status/limitations: supported in all versions

qsaProgramControlCinfo1RefreshRate 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.2.6
Access:        read-write
Reference:     None
Description:
Controls the rate at which the CtlrInfo1 data is refreshed
with new data for the Controllers. This value is specified
as number of seconds.
Support status/limitations: supported in all versions

qsaProgramControlCinfo2RefreshRate 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.2.7
Access:        read-write
Reference:     None
Description:
Controls the rate at which the CtlrInfo2 data is refreshed
with new data for the Controllers. This value is specified
as number of seconds.
Support status/limitations: supported in all versions

qsaProgramControlTerminalAgentsEnabledState 

Registration:  1.3.6.1.4.1.21535.3.3.1.1.2.8
Access:        read-only
Reference:     None
Description:
Indicates if terminal agents have all been disabled. Future:
allow terminal agent enable/disable through set of this var.
Support status/limitations: supported in all versions

qsaStoreDescription 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.1
Access:        read-write
Reference:     None
Description:
String used to describe the store system. For example:
'Store 1347 in Raleigh, NC' or 'Customer System A in Lab'.
This value comes from the InSight Configuration file
(InSight.cdi) 'storeDescription' setting.
Support status/limitations: supported in all versions

qsaStoreNumber 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.2
Access:        read-only
Reference:     None
Description:
Store number for this system.
Support status/limitations: supported in all versions

qsaStoreAddress 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.3
Access:        read-write
Reference:     None
Description:
Mailing/shipping address for this store. This value comes
from the InSight Configuration file (InSight.cdi) or it can
be SET from an outside source.
Support status/limitations: supported in all versions

qsaStorePhone 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.4
Access:        read-write
Reference:     None
Description:
Phone number(s) for this store. This value comes from the
InSight Configuration file (InSight.cdi) or it can
be SET from an outside source.
Support status/limitations: supported in all versions

qsaStoreManager 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.5
Access:        read-write
Reference:     None
Description:
Store Manager for this store. This value comes from the
InSight Configuration file (InSight.cdi) or it can be SET
from an outside source.
Support status/limitations: supported in all versions

qsaStorePrimaryCAgentNodeID 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.6
Access:        read-only
Reference:     None
Description:
Node ID of the server/controller which is designated
as the preferred contact point for external client requests.
Support status/limitations: supported in all versions

qsaStoreBackupCAgentNodeID 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.1.7
Access:        read-only
Reference:     None
Description:
Node ID of the server/controller which is designated
as the backup contact point for external client requests.
Support status/limitations: supported in all versions

qsaStoreFileServicesFileName 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.2.1.1
Access:        read-write
Reference:     None
Description:
Full file name to be accessed. This field
must be Set to obtain data for any other
FileServices mibVar. FileName must contain 'QSA' as
part of the fileName, as this restricts using InSight
to access non-InSight files.
Support status/limitations: supported in all versions

qsaStoreFileServicesFileSize 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.2.1.2
Access:        read-only
Reference:     None
Description:
File size of the FileName.
Support status/limitations: supported in all versions

qsaStoreFileServicesFileTimeStamp 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.2.1.3
Access:        read-only
Reference:     None
Description:
Date and time stamp of the FileName.
Support status/limitations: supported in all versions

qsaStoreFileServicesFileBlockSize 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.2.1.4
Access:        read-write
Reference:     None
Description:
Data block size to be returned in FileServicesData.
Default block size is 2048.
Support status/limitations: supported in all versions

qsaStoreFileServicesDataBlockNum 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.2.2.1.1.1
Access:        934
Reference:     None
Description:

qsaStoreFileServicesDataBlock 

Registration:  1.3.6.1.4.1.21535.3.3.2.1.2.2.1.1.2
Access:        read-only
Reference:     None
Description:
A block of file data.
For reads (Gets) the block of data is from offset
qsaStoreFileServicesDataBlockNum *
qsaStoreFileServicesDataBlockSize.
For writes, the first four bytes of octet data
represents the length of data to be written to
the file. This length field in the first
four bytes of octet data must be equal to
qsaStoreFileServicesFileBlockSize. The data
to be written to the file immediately follow
the four-byte length in the octet data. The
data will be written to offset
qsaStoreFileServicesDataBlockNum *
qsaStoreFileServicesDataBlockSize.
Support status/limitations: supported in all versions

qsaClientSessionStartTime 

Registration:  1.3.6.1.4.1.21535.3.3.2.4.1.1
Access:        read-only
Reference:     None
Description:
Date and time when session started.
Support status/limitations: supported in all versions

qsaClientSessionUserName 

Registration:  1.3.6.1.4.1.21535.3.3.2.4.1.2
Access:        read-write
Reference:     None
Description:
Logged on user name. MIB access is conditional based on
logged on user. For 4690, user name/password must match
be a valid 4690 user.
Support status/limitations: supported in all versions

qsaClientSessionPassword 

Registration:  1.3.6.1.4.1.21535.3.3.2.4.1.3
Access:        read-write
Reference:     None
Description:
Logon password. On 'GET' operations, the string '********'
is always returned.
Support status/limitations: supported in all versions

qsaTerminalMonitorControlEventMode 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.1.1
Access:        read-write
Reference:     None
Description:
Controls mechanism client would like to use for receiving
device i/o events. The default is get(0). Possible values
are:
get(0) - client retrieves events using get,
getNext, getBulk
trap(1) - device io events are reported through
snmp trap mechanism
port(2) - device io events are reported to client
using a connection to a specified port
idaSession(3) - send notifications over existing
InSight Direct Access session
Note: currently the only supported option is get(0).
Support status/limitations: limited to get(0) in all versions

qsaTerminalMonitorControlMultiTermTerminalsToMonitor 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.2.1
Access:        read-write
Reference:     None
Description:
When monitoring selected devices on multiple terminals,
this variable provides a way to specify a the list of
terminals to monitor. The values specified can be a
a list of terminals and/or a range of terminals. If a list
is specified, each terminal number or range of terminals is
separated by a comma. All specified terminals must be
within the range of 1 to 999. Specifying a terminal number
of zero is invalid. To turn OFF multiple terminal
monitoring, perform a SET with null string.
Example values for this variable are:
(note: the <> are NOT to be included in the SET string)
<1-999>
<1-20,50-55,99>
<> (a null string turns OFF multi term monitoring.)

Usage note: This variable must be the last variable in
the sequence of SETs so that the controller agent can
avoid sending multiple commands to the terminal
agents.
Support status/limitations: supported in all versions

qsaTerminalMonitorControlMultiTermDevicesToMonitor 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.2.2
Access:        152
Reference:     None
Description:
When monitoring selected devices on multiple terminals,
this variable provides a way to specify a the list of
terminals to monitor. The values specified can be a
a list of terminals and/or a range of terminals. If a list
is specified, each terminal number or range of terminals is
separated by a comma. All specified terminals must be
within the range of 1 to 999. Specifying a terminal number
of zero is invalid. To turn OFF multiple terminal
monitoring, perform a SET with null string.
Example values for this variable are:
(note: the <> are NOT to be included in the SET string)
<1-999>
<1-20,50-55,99>
<> (a null string turns OFF multi term monitoring.)

Usage note: This variable must be the last variable in
the sequence of SETs so that the controller agent can
avoid sending multiple commands to the terminal
agents.
Support status/limitations: supported in all versions

qsaTerminalMonitorControlMultiTermSystemDisplayMonitor 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.2.3
Access:        read-write
Reference:     None
Description:
This variable allows monitoring of the system display no
matter what type of display is defined as the system
display. This variable resolves the possible conflict if
the range of terminals being monitored includes terminals
that have different system display types and the fact that
there is no way to handle that with device masks in
qsaTerminalMonitorControlMultiTermDevicesToMonitor.

Usage note: A SET of this var must be eventually followed by
a SET for qsaTerminalMonitorControlMutliTerminalsToMonitor
var to trigger the config command to the terminals.
Support status/limitations: supported in all versions

qsaTerminalMonitorControlMultiTermDisplayRectangle 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.2.4
Access:        read-write
Reference:     None
Description:
This variable can be used to restrict the amount of display
data being monitored for full-screen display types.
The rectangle is specified as an upper left row, col
coordinate with numRows, numCols. The data octet can be
either:

ulr.ulc.nr.nc OR
ulr.ulr.ulc.ulc.nr.nr.nc.nc

Note that setting this variable does not guarantee that
incoming display events will be restricted to the specified
rectange. Specifying a rectangle is, instead, a hint which
allows less data to flow most of the time. There are times,
such as when different clients specify different rectangles,
that the system may pass 'outside' data to a client.

Usage note: A SET of this var must be eventually followed by
a SET for qsaTerminalMonitorControlMutliTerminalsToMonitor
var to trigger the config command to the terminals.
Support status/limitations: not yet fully implemented

qsaTerminalMonitorControlTermNum 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.1
Access:        read-only
Reference:     None
Description:
Terminal number. Valid values are 1 - 999. Must be a
monitorable terminal number (an online terminal running a
terminal agent).
Support status/limitations: supported in all versions

qsaTerminalMonitorControlMode 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.2
Access:        read-write
Reference:     None
Description:
Used to enable/display monitoring or remote control. The
default value is off(0). Possible values are:
off(0) - monitoring not active for this terminal
monitor(1) - monitoring active for this terminal
control(2) - control is active for this terminal

Usage note: A SET of this var must be eventually followed by
a SET for qsaTerminalMonitorControlDevicesToMonitor
var to trigger the config command to the terminals.
Support status/limitations: supported in all versions

qsaTerminalMonitorControlDevicesToMonitor 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.3
Access:        152
Reference:     None
Description:
Used to enable/display monitoring or remote control. The
default value is off(0). Possible values are:
off(0) - monitoring not active for this terminal
monitor(1) - monitoring active for this terminal
control(2) - control is active for this terminal

Usage note: A SET of this var must be eventually followed by
a SET for qsaTerminalMonitorControlDevicesToMonitor
var to trigger the config command to the terminals.
Support status/limitations: supported in all versions

qsaTerminalMonitorControlExclusiveAccess 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.4
Access:        read-write
Reference:     None
Description:
If controlling terminal, indicates if other clients are
allowed to simultaneously control the same terminal. The
default is exclusive(1). Possible values are:
notExclusive(0) - multiple clients can control the same
terminal
exclusive(1) - only one client can control at a time

Usage note: A SET of this var must be eventually followed by
a SET for qsaTerminalMonitorControlDevicesToMonitor
var to trigger the config command to the terminals.
Support status/limitations: future

qsaTerminalMonitorControlEventOriginControl 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.3.1.1.5
Access:        read-write
Reference:     None
Description:
This entry controls which events are sent to the client's
event queue. There are 4 possible origins of device events:

RealTimeEvents 0x01
CurrentStateEvents 0x02
DeviceHistoryQEvents 0x04
GlobalHistoryQEvents 0x08

This variable allows the client to control the types of
events it will receive upon starting monitoring. The default
value for this variable is RealTimeEvents+CurrentStateEvents+
GlobalHistoryEvents which is 0x0B.

Usage note: A SET of this var must be eventually followed by
a SET for qsaTerminalMonitorControlDevicesToMonitor
var to trigger the config command to the terminals.
Support status/limitations: supported in all versions

qsaFilterControlAllowedDevicesTableDeviceIndex 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.1.1.1
Access:        read-only
Reference:     None
Description:
Device type for this entry. See definition for
QsaPosDeviceIndex.
Support status/limitations:
future feature targeted for 0.99.0.30

qsaFilterControlAllowedDevicesTableTerminalBitList 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.1.1.2
Access:        read-only
Reference:     None
Description:
Bit string with each bit position representing a valid 4690
terminal number (1-999). The left-most bit (0x80) of the
first octet represents terminal 1. If the bit is ON, the
corresponding terminal's device is allowed to be filtered.
Support status/limitations:
future feature targeted for 0.99.0.30

qsaFilterControlAllowedApplicationsTableIndex 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.2.1.1
Access:        read-only
Reference:     None
Description:
The Index used to specify each table entry
Support status/limitations:
future feature targeted for 0.99.0.30

qsaFilterControlAllowedApplicationsTableName 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.2.1.2
Access:        read-only
Reference:     None
Description:
Ascii string specifying an application allowed to
perform device filtering. This mibvar is populated
directly from the CDI file entries specifying valid
filter applications. One table entry for each valid
filter application.
Support status/limitations:
future feature targeted for 0.99.0.30

qsaFilterControlClientTableDeviceIndex 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.3.1.1
Access:        read-write
Reference:     None
Description:
Device type for this entry. See definition for
QsaPosDeviceIndex.
Support status/limitations:
future feature targeted for 0.99.0.30

qsaFilterControlClientTableFilteringOrder 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.3.1.2
Access:        read-write
Reference:     None
Description:
For multiple filter application environments, this field
can be used to specify the filter stack order. I/O events
are first passed to the top application and are propagated
down the stack to the bottom filter application before being
returned to the terminal application. The default value
of 0 adds the application to the bottom of any existing stack
for this device. Higher values equate to higher location in
the stack. Valid values are 0 to 255.
Support status/limitations:
future feature targeted for 0.99.0.30

qsaFilterControlClientTableTerminalList 

Registration:  1.3.6.1.4.1.21535.3.3.2.2.5.4.3.1.3
Access:        read-write
Reference:     None
Description:
Ascii string specifying a list of terminals that this
client is filtering for this device.
Support status/limitations:
future feature targeted for 0.99.0.30

qsa4690StoreOSVersion 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.1.1
Access:        read-only
Reference:     None
Description:
4690OS version, release and CD level. For example:
V3R3 CD 04H0.
Support status/limitations: supported in all versions

qsa4690StoreApplication 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.1.2
Access:        read-only
Reference:     None
Description:
Identifies type of application used on this store system.
Support status/limitations: supported in all versions

qsa4690StoreCSFVersion 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.1.3
Access:        read-only
Reference:     None
Description:
If controller is running on IBM or QVS 4690 Controller
Services Feature (CSF), identifies CSF version, release, cd
and efix level. Returns NULL string if non-CSF system.
For example: 3.0.0.0.
Support status/limitations: supported in all versions

qsa4690StoreNumConfiguredCtlrs 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.1.4
Access:        read-only
Reference:     None
Description:
Number of controllers configured for this store. Note that
there are some large stores that run as multiple logical
stores within a physical store. A given 4690 store system
(logical store) is identified by a unique store number.
Support status/limitations: supported in all versions

qsa4690StoreConfiguredCtlrIDs 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.1.5
Access:        read-only
Reference:     None
Description:
List of the 2-octet controller ID's configured for this
store system.
Support status/limitations: supported in all versions

qsa4690StoreThisCtlrNodeID 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.1.6
Access:        read-only
Reference:     None
Description:
Node ID of this ctlr. CC, DD, EE, etc
Support status/limitations: supported in all versions

qsaDumpArchivingActive 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.1.1
Access:        read-write
Reference:     None
Description:
Whether or not to archive dump data.
0 indicates archiving not active.
1 indicates archiving active.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpNumberTerminalArchives 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.1.2
Access:        read-write
Reference:     None
Description:
Number of terminal dumps to archive per controller.
Maximum is 99.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpNumberControllerArchives 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.1.3
Access:        read-write
Reference:     None
Description:
Number of controller dumps to archive per controller.
Maximum is 99.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveIndex 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.1
Access:        read-only
Reference:     None
Description:
The Index used to specify each table entry
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveLocationNode 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.2
Access:        1703
Reference:     None
Description:
The Index used to specify each table entry
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveSourceNode 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.3
Access:        1716
Reference:     None
Description:
The Index used to specify each table entry
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveDataType 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.4
Access:        read-only
Reference:     None
Description:
The type of data that the file contains.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveUniqueId 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.5
Access:        read-only
Reference:     None
Description:
Unique id for the data file.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveStartDateTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.6
Access:        read-only
Reference:     None
Description:
Date and time when the dump was initiated.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveEndDateTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.7
Access:        read-only
Reference:     None
Description:
Date and time when the dump completed.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveAvailableInfo 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.8
Access:        read-only
Reference:     None
Description:
Bit flag field indicating the data that is available
for this dump file.
The following bits are defined:
0x00000001 - 4690 raw dump file.
0x00000002 - 4690 system message report.
0x00000004 - 4690 dump formatter report.
0x00000008 - InSight dump formatter report.
0x00000010 - InSight device history extract.
0x00000020 - InSight cpuUtilization extract.
0x00000040 - InSight opstats history extract.
Support status/limitations:
future feature targeted for 0.99.0.??

qsaDumpArchiveFileList 

Registration:  1.3.6.1.4.1.21535.3.3.6.1.2.2.1.1.9
Access:        read-only
Reference:     None
Description:
List of archive files that are available.
Each file is full filespec including node id.
Example:
adxlxddn::qsa_dmpt:tdumpd.001 adxlxddn::qsa_dmpt:dumprpt.001
Support status/limitations:
future feature targeted for 0.99.0.??

qsa4690TerminalListType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.1.1.1
Access:        read-only
Reference:     None
Description:
Used to identify the type of terminal information being
requested. Possible values are: defined(1), known(2),
online(3), monitorable(4).
Support status/limitations: supported in all versions

qsa4690TerminalListChangeCounter 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.1.1.2
Access:        read-only
Reference:     None
Description:
This Sequence number is incremented each time this bitlist
is modified. User Application may periodically request
this TerminalListChangeCounter to determine if the BitList
has changed and needs to be retrieved again.
Note: It is more efficient to key on the
termBitListChangeEvent to determine if the BitList
has changed.
Support status/limitations: supported in all versions

qsa4690TerminalListCount 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.1.1.3
Access:        read-only
Reference:     None
Description:
Number of terminals that meet the criteria for this list
type. For defined and known terminals, setting this
variable to a value of zero will force an update of the
list (and this count).
Support status/limitations: supported in all versions

qsa4690TerminalListBitList 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.1.1.4
Access:        read-only
Reference:     None
Description:
Bit string with each bit position representing a valid 4690
terminal number (1-999). The left-most bit (0x80) of the
first octet represents terminal 1. This bit string provides
an efficient alternative to retrieving entries from List
Table 2.
Support status/limitations: supported in all versions

qsa4690TerminalList2TableTermNum 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.2.1.1
Access:        read-only
Reference:     None
Description:
Terminal number. Valid values are 1 - 999.
Support status/limitations: future

qsa4690DeviceIOSendEvent 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.1
Access:        read-write
Reference:     None
Description:
Allows sending device event to remotely controlled terminal.
The data format is:
tt ee pp d f data where:

tt is 2 octet termnum,
ee is 2 octet event id
pp is 2 octet event parm
d is 1 octet device index
f is 1 octet filler for alignment
data is n octet data
Support status/limitations:
keyboard events supported in all versions

qsa4690DeviceIOSysCmdTermNum 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.2.1.1
Access:        not-accessible
Reference:     None
Description:
Terminal number. Valid values are 1 - 999. Must be a
monitorable terminal number (an online terminal running a
terminal agent).

qsa4690DeviceIOSysCmd 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.2.1.2
Access:        read-write
Reference:     None
Description:
Sends the specified system command event to remotely
controlled terminal.

1=StopApp
2=StartDefaultApp
3=DumpTerminal
4=LoadCSU (4690 OS 4683, 4693, 4694 only)
5=LoadPrintUtility (4690 OS terminals only)
6=LoadTerminal
7=LoadTerminalConfig
8=Reflash4610 (4610 printer only)
9=SnapshotDumpTerm
Support status/limitations:
values 1-8 supported in all versions
value 9 not yet supported

qsa4690TermIOEventsFilterControlSendEvent 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.3.1
Access:        read-write
Reference:     None
Description:
Allows sending Filter Control device event to remotely
controlled terminal.
The data format is:
tt ee pp d f fch data where:

tt is 2 octet termnum,
ee is 2 octet event id
pp is 2 octet event parm
d is 1 octet device index
f is 1 octet filler for alignment
fch is 16 byte filter control header (see idaapis.h).
data is n octet data

Support status/limitations:
future feature targeted for 0.99.0.30

qsa4690EventMonitorEventIndex 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.1
Access:        not-accessible
Reference:     None
Description:
Sequential index of this IO monitor event. Starts at 0
at the start of a monitoring session for the termnum.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventSourceNode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.2
Access:        read-only
Reference:     None
Description:
Terminal number or controller node id associated with
I/O event. Valid terminal numbers are 1-999. Controller
node id's are 2-digit uppercase ASCII values with
possible range of CC through ZZ. For example, CC in hex
is coded as 0x4343 (decimal 17219).
Support status/limitations: supported in all versions

qsa4690EventMonitorEventTimeStamp 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.3
Access:        read-only
Reference:     None
Description:
Timestamp in milliseconds since agent start of this i/o
event. Agent is either term agent or ctlr agent. Some event
types leave this field at value 0. The field is always
valid for realtime and history terminal device events and
allows a client to calculate delta times between device
events.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventDeviceIndex 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.4
Access:        read-only
Reference:     None
Description:
Device type for this event. See definition for
QsaPosDeviceIndex.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.5
Access:        read-only
Reference:     None
Description:
Event type for this event. See definition of
QsaMonitorEventType.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventParm1 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.6
Access:        read-only
Reference:     None
Description:
A optional parameter associated with this specific EventType.
Usually this is a bit-defined flags field. See the
description of QsaMonitorEventType for EventParm1 values that
are possible for each individual event type.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventSeqNum 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.7
Access:        read-only
Reference:     None
Description:
Sequence number of this device event. This is global count
for all devices that are actively being monitored or having
in-memory histories kept.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventData 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.8
Access:        read-only
Reference:     None
Description:
Optional data associated with the EventType.
Support status/limitations: supported in all versions

qsa4690EventMonitorEventAltData 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.2.3.5.1.9
Access:        read-only
Reference:     None
Description:
Alternate way of retrieving rows of this table. The
octets of this variable contain all fields. The data format
is:
uuuu tt ee pp d f data where:

uuuu is 4 octet timestamp,
tt is 2 octet sourceNode,
ee is 2 octet event id
pp is 2 octet event parm
d is 1 octet device index
f is 1 octet filler for alignment
ss is 2 octet event sequence number
data is n octet data

Support status/limitations: supported in all versions

qsa4690KnownTerminalTermNum 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.1
Access:        read-only
Reference:     None
Description:
Terminal number. Valid values are 1 - 999.
Support status/limitations: supported in all versions

qsa4690KnownTerminalLoadDefDatabase 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.2
Access:        read-only
Reference:     None
Description:
Identifies location of terminal load definition record for
this terminal. 4690's terminal configuration data can exist
in two different databases. The legacy database is the
one that has been around the longest and supports terminals
prior to IBM's introduction of the SurePOS terminal. Generic
is the database supported by the java-based terminal
configuration application. Generic originally supported only
SurePOS terminals but has been enhanced to support all
terminal types and has been renamed 'generic' by IBM.
The generic database contains substantially less detailed
information than the legacy database. More configuration
information is determined at run-time than with legacy.
Possible values are: legacy(1), generic(2).
Support status/limitations: supported in all versions

qsa4690KnownTerminalType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.3
Access:        read-only
Reference:     None
Description:
Type of terminal from best available source. Source may be
legacy terminal configuration database, vpd file, or from
the terminal agent.
Support status/limitations: supported in all versions

qsa4690KnownTerminalLastOnlineTimeStamp 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.4
Access:        read-only
Reference:     None
Description:
Date and time when agent last saw terminal transition to
online.
Support status/limitations: supported in all versions

qsa4690KnownTerminalLastOfflineTimeStamp 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.5
Access:        read-only
Reference:     None
Description:
Date and time when agent last saw terminal transition to
offline.
Support status/limitations: supported in all versions

qsa4690KnownTerminalOnlineSeconds 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.6
Access:        read-only
Reference:     None
Description:
Accumulated total online seconds for this terminal since
terminal became known by the controller agent(s). Value is
accumulated by the controller agent(s) only when they are
running. This variable is meant to monitor activity over
relatively short time frames (days, weeks). It is not meant
to be 100% accurate across failures such as controller
rebuilds, etc.
Support status/limitations: supported in all versions

qsa4690KnownTerminalDeviceGroup 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.7
Access:        read-only
Reference:     None
Description:
Identifies the defined device group (or device
characteristics) for the specified terminal.
Support status/limitations: supported in all versions

qsa4690KnownTerminalDefaultApp1 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.8
Access:        read-only
Reference:     None
Description:
Identifies the primary non-java default application for
the terminal.
Support status/limitations: supported in all versions

qsa4690KnownTerminalDefaultJApp1 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.1.1.9
Access:        read-only
Reference:     None
Description:
Identifies the primary default java application for the
terminal (if java is used).
Support status/limitations: supported in all versions

qsa4690TerminalInfo1ActiveState 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.1
Access:        read-only
Reference:     None
Description:
Identifies active state of this terminal and whether or not
this terminal has an active InSight agent.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1AgentCapabilities 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.2
Access:        read-only
Reference:     None
Description:
Identifies capabilities of the terminal agent. (TBD)
Support status/limitations: future

qsa4690TerminalInfo1LastActiveDateTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.3
Access:        read-only
Reference:     None
Description:
Identifies date/time when this terminal was last seen
active.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1SystemManufacturer 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.4
Access:        read-only
Reference:     None
Description:
The manufacturer for this terminal. Comes from SMBIOS
information if available or IBM BIOS Vital Product Data.
Support status/limitations: future

qsa4690TerminalInfo1SystemProductName 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.5
Access:        read-only
Reference:     None
Description:
The product name for this terminal. This is usually a
manufacturer model number as opposed to model name. Comes
from SMBIOS information if available or IBM Vital Product
Data. For example: 4800-721.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1SystemModelName 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.6
Access:        read-only
Reference:     None
Description:
The model name for this terminal. This is derived by
InSight from the manufacturer and model number. Example:
SurePos 721.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1SystemSerialNumber 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.7
Access:        read-only
Reference:     None
Description:
The system serial number for this terminal. Comes from
SMBIOS information if available or IBM Vital Product Data.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1SystemBiosVersion 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.8
Access:        read-only
Reference:     None
Description:
The system BIOS version level for this terminal. Comes from
SMBIOS information if available or IBM Vital Product Data.
Support status/limitations: future

qsa4690TerminalInfo1CpuModel 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.15
Access:        read-only
Reference:     None
Description:
Identifies the CPU family type for the specified terminal.
0=Unknown
1=286
2=386sx
3=386
4=486sx
5=486
6=Intel Pentium (Family 5)
7=Non-Intel Family 5 (Intel Pentium Class)
8=Intel Pentium Pro, Celeron, PII, PIII (Family 6)
9=Non-Intel Family 6 (Intel Pentium Pro through PIII Class)
10=Intel Itanium (Family 7)
11=Non-Intel Family 7
12=Intel Pentium 4 (Intel Family 15, Ext.Family 0)
13=Non-Intel Family 15, Ext Family 0
14=Intel Itanium 2 (Intel Family 15, Ext.Family 1)
15=Non-Intel Family 15, Ext Family 1
Support status/limitations: supported in all versions

qsa4690TerminalInfo1CpuSpeed 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.16
Access:        read-only
Reference:     None
Description:
Identifies the approximate CPU speed in MHz for the
specified terminal.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1TotalMemory 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.17
Access:        read-only
Reference:     None
Description:
Identifies the total amount of memory for the
specified terminal. Size reported is bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1DiskCSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.18
Access:        read-only
Reference:     None
Description:
Identifies the total amount of disk space for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1DiskQSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.19
Access:        read-only
Reference:     None
Description:
Identifies the total amount of Q ramdisk space for
the specified terminal. Size reported is K bytes.
Support status/limitations: future

qsa4690TerminalInfo1DiskXSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.20
Access:        read-only
Reference:     None
Description:
Identifies the total amount of X ramdisk space for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1DiskYSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.21
Access:        read-only
Reference:     None
Description:
Identifies the total amount of Y ramdisk space for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1AgentIPLTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.22
Access:        read-only
Reference:     None
Description:
Local date/time when terminal agent started. The agent
starts during terminal IPL so this is also the terminal IPL
date/time.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1SystemDisplayIdx 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.23
Access:        read-only
Reference:     None
Description:
Identifies the Device Index value of this terminal's
system display.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1KeybName 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.24
Access:        read-only
Reference:     None
Description:
Identifies keyboard layout name in use by the terminal.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysPrinter 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.25
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a printer device and the Device
Index value for the printer.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysAndisplay 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.26
Access:        read-only
Reference:     None
Description:
Identifies if terminal has an ANDISPLAY device and the Device
Index value for the display.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysAndisplay2 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.27
Access:        read-only
Reference:     None
Description:
Identifies if terminal has an ANDISPLAY2 device and the
Device Index value for the display.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysAndisplay3 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.28
Access:        read-only
Reference:     None
Description:
Identifies if terminal has an ANDISPLAY3 device and the
Device Index value for the display.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysVdisplay 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.29
Access:        read-only
Reference:     None
Description:
Identifies if terminal has an VDISPLAY device and the
Device Index value for the display.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysVdisplay2 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.30
Access:        read-only
Reference:     None
Description:
Identifies if terminal has an VDISPLAY2 device and the
Device Index value for the display.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysCashD 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.31
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Cashdrawer device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysCashD2 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.32
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a 2nd Cashdrawer device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysNVRam 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.33
Access:        read-only
Reference:     None
Description:
Identifies if terminal has an NVRam device and the
Device Index value for the NVRam.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysSerial1 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.34
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Serial1 device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysSerial2 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.35
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Serial2 device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysSerial3 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.36
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Serial3 device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysSerial4 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.37
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Serial4 device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysScanner 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.38
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Scanner device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysScale 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.39
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Scale device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PhysKeyboard 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.40
Access:        read-only
Reference:     None
Description:
Identifies if terminal has a Keyboard device and the
Device Index value for the device.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1NVRamSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.41
Access:        read-only
Reference:     None
Description:
Indicates the size of the NVRam for this Terminal.
Value is represented as Kb. A value of 16 indicates 16Kb of
NVRam.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1KeyboardIBMType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.42
Access:        read-only
Reference:     None
Description:
Indicates the Type of Keyboard for this Terminal. Possible
values are:
kbNone(0)
kb4683_50Key(1)
kb4693_50Key(2)
kb4683_Alpha(3)
kb4683_ANPOS(4)
kb4693_ANPOS(5)
kb4683_Matrix(6)
kb4693_133Key(7)
kbKeyboard_V(8)
kbKeyboard_VI(9)
kbPLU(10)
kbSurePointKeyPad(11)
Support status/limitations: supported in all versions

qsa4690TerminalInfo1PrinterType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.43
Access:        read-only
Reference:     None
Description:
Indicates the type of Printer for this Terminal. Possible
values are:
mod1_2(1)
mod3_4(2)
pr4610(3)
pr4689_001(4)
pr4689_301(5)
Support status/limitations: supported in all versions

qsa4690TerminalInfo14610ECLvl 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.44
Access:        read-only
Reference:     None
Description:
Indicates the EC Level of the 4610 printer
for this Terminal. Usually displayed as a hex value.
Support status/limitations: supported in all versions

qsa4690TerminalInfo14610Model 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.45
Access:        read-only
Reference:     None
Description:
Indicates the 4610 Model for this Terminal.
0=TI1
1=TI2
2=TI3
3=TI4
4=TI5
5=SS512K
6=TI3-8Meg
7=TI4-8Meg
8=SS8Meg
9=SSDBCS
Support status/limitations: supported in all versions

qsa4690TerminalInfo1TcpipAddress0 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.46
Access:        read-only
Reference:     None
Description:
Identifies the tcpip address for this terminal. Address
is used if the terminal is not configured for tcpip.
Support status/limitations: supported in all versions

qsa4690TerminalInfo1MacAddress0 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.47
Access:        read-only
Reference:     None
Description:
Identifies the lan adapter address for the first or
only lan adapter. If there is more than one lan adapter, the
address is for the adapter used for terminal/controller
communications (tcc).
Support status/limitations: supported in all versions

qsa4690TerminalInfo1TccType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.48
Access:        read-only
Reference:     None
Description:
Identifies the tcc type for the terminal.
0=Unknown, 1=Loop1, 2=Loop2, 3=Ctlr/Term,
4=Lan, 5=RF, 6=TCC/IP
Support status/limitations: supported in all versions

qsa4690TerminalInfo1JavaSupported 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.49
Access:        read-only
Reference:     None
Description:
Indicates if terminal is configured to support java. Possible
values are:
disabled(0)
enabled(1)
Support status/limitations: supported in all versions

qsa4690TerminalInfo1JavaDeviceRedirectionInfo 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.2.1.50
Access:        read-only
Reference:     None
Description:
A mask of bits representing a device or list of devices
that are redirected for handling by java programs. The
list of devices and redirection type are:
0x80 => I/O Processor redirected
0x40 => ANDISPLAY1 redirected
0x20 => ANDISPLAY2 redirected
0x10 => CR redirected for monitoring only
0x08 => CR redirected
0x04 => DI redirected
0x02 => SJ redirected
0x01 => MSR redirected
Support status/limitations: supported in all versions

qsa4690TerminalInfo2PrimaryController 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.1
Access:        read-only
Reference:     None
Description:
Identifies the Primary Controller for
the specified terminal.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2ConnectedToController 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.2
Access:        read-only
Reference:     None
Description:
Identifies the Controller that the specified terminal
is connected to.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2FreeMemory 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.3
Access:        read-only
Reference:     None
Description:
Identifies the Free Memory for the specified terminal.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2UsedMemory 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.4
Access:        read-only
Reference:     None
Description:
Identifies the Used Memory for the specified terminal.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2ManagerKeyPosition 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.5
Access:        read-only
Reference:     None
Description:
Identifies the Manager Key Position for the specified
terminal. 0=Unlocked, 1=Locked.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2ManagerKeySoftPosition 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.6
Access:        read-only
Reference:     None
Description:
Identifies the 'Software' Manager Key Position for
the specified terminal. This value indicates the
software position of the manager key on the terminal.
The software position may not match the physical position
of the manager key because you may modify the software
position to ON when the physical position is OFF. You
may modify the software position by Setting
qsa4690DeviceIOMgrEvent.
0=Unlocked, 1=Locked.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2WaitLight 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.7
Access:        read-only
Reference:     None
Description:
Identifies the Wait Light status for
the specified terminal.
0=Off, 1=On.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2MsgLight 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.8
Access:        read-only
Reference:     None
Description:
Identifies the msg Light status for
the specified terminal.
0=Off, 1=On.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2OfflineLight 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.9
Access:        read-only
Reference:     None
Description:
Identifies the Offline Light status for
the specified terminal.
0=Off, 1=On.
Support status/limitations: supported in all versions

qsa4690TerminalInfo24thLight 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.10
Access:        read-only
Reference:     None
Description:
Identifies the 4th Light status for
the specified terminal.
0=Off, 1=On.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskCUsed 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.11
Access:        read-only
Reference:     None
Description:
Identifies the amount of C disk space used for
the specified terminal.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskCFree 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.12
Access:        read-only
Reference:     None
Description:
Identifies the amount of C disk space free for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskQUsed 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.13
Access:        read-only
Reference:     None
Description:
Identifies the amount of Q disk space used for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskQFree 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.14
Access:        read-only
Reference:     None
Description:
Identifies the amount of Q disk space free for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskXUsed 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.15
Access:        read-only
Reference:     None
Description:
Identifies the amount of X disk space used for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskXFree 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.16
Access:        read-only
Reference:     None
Description:
Identifies the amount of X disk space free for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskYUsed 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.17
Access:        read-only
Reference:     None
Description:
Identifies the amount of Y disk space used for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2DiskYFree 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.18
Access:        read-only
Reference:     None
Description:
Identifies the amount of Y disk space free for
the specified terminal. Size reported is K bytes.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2CurrentApp 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.19
Access:        read-only
Reference:     None
Description:
Identifies the executable name of the currently running
terminal app.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2CashDrawer1Position 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.20
Access:        read-only
Reference:     None
Description:
Identifies the position of cash drawer 1.
0=Closed, 1=Open
Support status/limitations: supported in all versions

qsa4690TerminalInfo2CashDrawer2Position 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.21
Access:        read-only
Reference:     None
Description:
Identifies the position of cash drawer 2.
0=Closed, 1=Open
Support status/limitations: supported in all versions

qsa4690TerminalInfo2ApplicationActive 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.22
Access:        read-only
Reference:     None
Description:
Identifies whether an application is executing on
the specified terminal.
0=No Application Active, 1=Application Active.
Support status/limitations: supported in all versions

qsa4690TerminalInfo2CurrentInputStateTable 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.3.3.1.23
Access:        read-only
Reference:     None
Description:
Identifies the Input State Table name currently active
in the terminal. If no currently active Input State Table,
this will contain the last known Input State Table for
the terminal.
Support status/limitations: supported in all versions

qsa4690DisplayDeviceIndex 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.1
Access:        read-only
Reference:     None
Description:
Index used to access this display device.
Support status/limitations: supported in all versions

qsa4690DisplayType 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.2
Access:        read-only
Reference:     None
Description:
Display type. Types are: alphanumeric(1), operator(2),
shopper(3), lcd(4), vfdII(5), vfdIISideA(6), vfdIISideb(7),
apaDisplay(8), lcdVideo(9), video(10).
Support status/limitations: supported in all versions

qsa4690DisplayNumRows 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.3
Access:        read-only
Reference:     None
Description:
Number of rows for this display.
Support status/limitations: supported in all versions

qsa4690DisplayNumCols 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.4
Access:        read-only
Reference:     None
Description:
Number of columns for this display.
Support status/limitations: supported in all versions

qsa4690DisplayDataChangeCounter 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.5
Access:        read-only
Reference:     None
Description:
This Sequence number is incremented each time data in the
Display Data for this Device Idx is modified. User
Application may periodically request this
DataChangeCounter to determine if the Display Data
has changed and needs to be retrieved again.
Support status/limitations: supported in all versions

qsa4690DisplayIsSystem 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.6
Access:        read-only
Reference:     None
Description:
Indicates whether this is the system display or not.
0=Not System display. 1=System display.
Support status/limitations: supported in all versions

qsa4690DisplayTouchScreenFeature 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.7
Access:        read-only
Reference:     None
Description:
Indicates whether this display supports touch screen.
0=No Touch Screen. 1=Supports Touch Screen.
Support status/limitations: supported in all versions

qsa4690DisplayWithThreeTrackMagReader 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.8
Access:        read-only
Reference:     None
Description:
Indicates whether this display supports a three track
magnetic stripe reader.
0=No msg stripe reader. 1=Mag Stripe Reader exists.
Support status/limitations: supported in all versions

qsa4690DisplayUsedAsTwoTrackReader 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.9
Access:        read-only
Reference:     None
Description:
Indicates whether the mag stripe reader acts as a two
stripe reader.
0=Not a two track reader. 1=Used as two track reader.
Support status/limitations: supported in all versions

qsa4690DisplayCapableOfReadingTrackOneTwo 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.10
Access:        read-only
Reference:     None
Description:
Indicates whether the mag stripe reader reads both
track one and track two data.
0=Not a two track reader. 1=Used as two track reader.
Support status/limitations: supported in all versions

qsa4690DisplayResolution 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.11
Access:        read-only
Reference:     None
Description:
Identifies the resolution for this display.
0=unknown, 1=2x20, 2=800x600.
Support status/limitations: supported in all versions

qsa4690DisplayJavaGraphicsSupported 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.12
Access:        read-only
Reference:     None
Description:
Indicates whether java graphics are support by this display.
0=No java support. 1=Java Support.
Support status/limitations: supported in all versions

qsa4690DisplayMonitorRectangle 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.1.1.1.13
Access:        read-only
Reference:     None
Description:
Indicates that the data is for a specified rectangle.
0=full display. 1=data is for a specified rectangle.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsGlobalKeymapUniqueID 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.1.1.1
Access:        read-only
Reference:     None
Description:
This value is a unique ID (actually a crc) which is generated
from all the fields that make up the keyboard type,
and keyboard definition record (keymap) for a specified
TermNum. A client can use this unique ID to validate
locally saved copies of keyboard / keymap information.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsPerKeySwitchNumber 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.1
Access:        read-only
Reference:     None
Description:
Key-Switch number for this key. See IBM's [Point Of Sale
Subystem Installation, Keyboards, and Code Pages]
manual for identification of Key-Switch numbers on the
various keyboards.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsPerKeyPairedWithSwitchNumbers 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.2
Access:        read-only
Reference:     None
Description:
Value is 0 except for keys that are paired with one or more
other keys. A paired key means that a key cap covers two or
more actual key switches. This variable allows for up to
4 key switches to be paired with this key switch. The octets
are filled in starting with the least signifcant byte for
the first paired switch, etc.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsPerKeyNormalFunctionCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.3
Access:        read-only
Reference:     None
Description:
Function code for normal or un-shifted key press. Possible
values are:
-1 - no meaning or keyboard does not support (e.g.
many keyboards to not have shift/alt).
00 - S1
01 - S2
02 - Double 0
03 - Triple 0
32 - no POS function code (x20)
48-57 - Numeric '0' -> '9'
61-255 - 4690 POS function codes.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsPerKeyShiftFunctionCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.4
Access:        read-only
Reference:     None
Description:
Function code if shift-key is pressed. See
qsa4690KeyboardDefsPerKeyNormalFunctionCode for possible
values.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsPerKeyCtrlFunctionCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.5
Access:        read-only
Reference:     None
Description:
Function code if ctrl-key is pressed. See
qsa4690KeyboardDefsPerKeyNormalFunctionCode for possible
values.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsPerKeyAltFunctionCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.2.1.6
Access:        read-only
Reference:     None
Description:
Function code if alt-key is pressed. See
qsa4690KeyboardDefsPerKeyNormalFunctionCode for possible
values.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsGlobalStateTableName 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.3.1.1
Access:        read-only
Reference:     None
Description:
Identifies the 4690 Input State Table (IST) that applies to
this row in the table.
Support status/limitations: supported in all versions

qsa4690KeyboardDefsGlobalStateTableUniqueID 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.3.1.2
Access:        read-only
Reference:     None
Description:
This value is a unique ID (actually a crc) which is generated
from all the fields that make up the Input State Tables
labels for each Func Code in the Input State Table
A client can use this unique ID to validate locally saved
copies of keyboard labeling information.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.1
Access:        read-only
Reference:     None
Description:
Keyboard function code. See
qsa4690KeyboardDefsPerKeyNormalFunctionCode for possible
values.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCodeLabelText 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.2
Access:        read-write
Reference:     None
Description:
Text description of function code.
Max length 20 characters.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCodeLabelAbbrev 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.3
Access:        read-write
Reference:     None
Description:
Abbreviated text description of function code.
Max length 8 characters.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCodeLabelHelpText 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.4
Access:        read-write
Reference:     None
Description:
Help text for function code.
Max length 2000 characters.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCodeLabelTextColor 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.5
Access:        read-write
Reference:     None
Description:
Optional value specifying color used to display text for
this function code. Value is RGB color value. Value 0 means
default color.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCodeLabelBackgroundColor 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.6
Access:        read-write
Reference:     None
Description:
Optional value specifying color used as background for text
for this function code. Value is RGB color value. Value 0
means default color.
Support status/limitations: supported in all versions

qsa4690KeyboardFunctionCodeLabelAlphaChar 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.4.1.7
Access:        read-write
Reference:     None
Description:
The alpha character for this function code.
Max length 1 character.
Support status/limitations: supported in all versions

qsa4690KeyboardScanCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.5.1.1
Access:        read-only
Reference:     None
Description:
Keyboard Scan code.
Support status/limitations: supported in all versions

qsa4690KeyboardScanCodeFuncCode 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.5.1.2
Access:        read-only
Reference:     None
Description:
Current FuncCode assigned to the specifed terminal
and Scan Code.
Support status/limitations: supported in all versions

qsa4690KeyboardScanCodeLabelAbbrev 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.2.5.1.3
Access:        read-only
Reference:     None
Description:
Abbreviated text description of function code.
Max length 8 characters.
Support status/limitations: supported in all versions

qsa4690PrinterDeviceIndex 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.1
Access:        read-only
Reference:     None
Description:
Index used to access this printer device.
Support status/limitations: supported in all versions

qsa4690PrinterCapabilities 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.2
Access:        read-only
Reference:     None
Description:
Bit flags field used to indicate capabilities of printer.
The following bits are defined:
0x00000001 - Printer has built-in check MICR reader
0x00000002 - Printer has check flipper
Support status/limitations: supported in all versions

qsa4690PrinterReportingCapabilities 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.3
Access:        read-only
Reference:     None
Description:
Bit flags field used to indicate reporting capabilities of
printer. The following bits are defined:
0x00000001 - Reports Serial Number
0x00000002 - Reports CrPaperCuts
0x00000004 - Reports CrCharsPrinted
0x00000008 - Reports CrMotorSteps
0x00000010 Reports CrCoverOpens
0x00000020 - Reports CrFailedCuts
0x00000040 - Reports DiCharsPrinted
0x00000080 - Reports DiPaperFeedMotorSteps
0x00000100 - Reports DiTransportMotorStarts
0x00000200 - Reports HomeErrors
0x00000400 - Reports DiCoverOpens
0x00000800 - Reports DiFormInserts
0x00001000 - Reports MicrReads
0x00002000 - Reports MicrHighInterferenceReads
0x00004000 - Reports MicrFailedReads
0x00008000 - Reports CheckFlips
0x00010000 - Reports CheckFlipFailures
0x80000000 - Reporting confirmed valid since manufacture
Support status/limitations: supported in all versions

qsa4690PrinterSerialNumber 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.4
Access:        read-only
Reference:     None
Description:
Printer serial number.
Support status/limitations: supported in all versions

qsa4690PrinterCrPaperCuts 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.5
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterCrCharsPrinted 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.6
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterCrMotorSteps 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.7
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterCrCoverOpens 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.8
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterCrFailedCuts 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.9
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterDiCharsPrinted 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.10
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterDiPaperFeedMotorSteps 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.11
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterDiTransportMotorStarts 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.12
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterHomeErrors 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.13
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterDiCoverOpens 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.14
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterDiFormInserts 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.15
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterMicrReads 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.16
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterMicrHighInterferenceReads 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.17
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterMicrFailedReads 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.18
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterCheckFlips 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.19
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsa4690PrinterCheckFlipFailures 

Registration:  1.3.6.1.4.1.21535.3.3.6.2.4.3.1.1.20
Access:        read-only
Reference:     None
Description:

Support status/limitations: supported in all versions

qsaOpStatsMonitorControlNode 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.1
Access:        4522
Reference:     None
Description:

qsaOpStatsMonitorControlHistoryInterval 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.2
Access:        read-only
Reference:     None
Description:
Length of time that each history entry represents in the
Operational Statistics table. The default is 1 hour. The
choices are 1 minute, 5 minutes, 15 minutes, 30 minutes,
1 hour. Possible values are decimal numbers appended by the
unit: h - hour, m - minute, or s - second. If no unit
is appended, the value is minutes.
Support status/limitations:
read-only: supported in all versions
read-write: future

qsaOpStatsMonitorControlHistorySize 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.3
Access:        read-only
Reference:     None
Description:
Total number of history entries in the operational statistics
table. The default is 24. This parameter makes the
operational statistics table a variable size table.
Support status/limitations:
read-only: supported in all versions
read-write: future

qsaOpStatsMonitorControlLogHistoryData 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.4
Access:        read-only
Reference:     None
Description:
Setting to true causes each history row to be written to the
log file.
Support status/limitations:
read-only: supported in all versions
read-write: future

qsaOpStatsMonitorControlMonitorableDevices 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.5
Access:        152
Reference:     None
Description:
Setting to true causes each history row to be written to the
log file.
Support status/limitations:
read-only: supported in all versions
read-write: future

qsaOpStatsMonitorControlDevicesToMonitor 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.6
Access:        152
Reference:     None
Description:
Setting to true causes each history row to be written to the
log file.
Support status/limitations:
read-only: supported in all versions
read-write: future

qsaOpStatsMonitorControlRow1EventFrequency 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.1.1.7
Access:        read-write
Reference:     None
Description:
Value in seconds indicating frequency that row 1 (polling
interval row) will be sampled and sent. Valid values are
15 and 30. The default value is 0 which means that no
separate row 1 events will be generated outside those sent
when rows 1-6 are sent.

Usage note: A SET of this var must be eventually followed by
a SET for qsaOpStatsMonitorControlDevicesToMonitor
var to trigger the config command to the terminals.
Support status/limitations: supported in all versions

qsaOpStatsNode 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.1
Access:        4679
Reference:     None
Description:
Each entry contains operations statistics for a particular
node/terminal and device/entity over a different interval.

qsaOpStatsEntity 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.2
Access:        4691
Reference:     None
Description:
Each entry contains operations statistics for a particular
node/terminal and device/entity over a different interval.

qsaOpStatsRowIndex 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.3
Access:        4700
Reference:     None
Description:
Each entry contains operations statistics for a particular
node/terminal and device/entity over a different interval.

qsaOpStatsIntervalName 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.4
Access:        read-only
Reference:     None
Description:
Description of interval
Support status/limitations: supported in all versions

qsaOpStatsIntervalStartTime 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.5
Access:        read-only
Reference:     None
Description:
Start time of interval
Support status/limitations: supported in all versions

qsaOpStatsIntervalLength 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.6
Access:        read-only
Reference:     None
Description:
Length of interval associatied with counts.
Support status/limitations: supported in all versions

qsaOpStatsEventCount 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.7
Access:        read-only
Reference:     None
Description:
Total count of operations or other events for this
device/entity.
Support status/limitations: supported in all versions

qsaOpStatsAdverseCount 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.8
Access:        read-only
Reference:     None
Description:
Total count of possibly adverse results/events.
Support status/limitations: future

qsaOpStatsAdverseCountMaximum 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.9
Access:        read-only
Reference:     None
Description:
Highest AdverseCount found in a single polling interval.
Support status/limitations: future

qsaOpStatsAdverseCountMaxChanged 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.2.1.10
Access:        read-only
Reference:     None
Description:
Timestamp when qsaOpStatsAdverseCountMaximum last changed.
Support status/limitations: future

qsaOpStatsAdverseEventInfoIndex 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.3.1.1
Access:        4812
Reference:     None
Description:
Each entry contains operations statistics for a particular
node/terminal and device/entity over a different interval.
Support status/limitations: future

qsaOpStatsAdverseEventInfoTime 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.3.1.2
Access:        read-only
Reference:     None
Description:
Time/date of adverse event.
Support status/limitations: future

qsaOpStatsAdverseEventInfoType 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.3.1.3
Access:        read-only
Reference:     None
Description:
Total count of operations or other events for this
device/entity.
Support status/limitations: future

qsaOpStatsAdverseEventInfoData 

Registration:  1.3.6.1.4.1.21535.3.3.3.1.2.3.1.4
Access:        read-only
Reference:     None
Description:
Up to 6 octets of additional information for advers event.
For _4690read/_4690write events, first 4 octets will
contain return code in network byte order. For _4690log
events, octets will contain 4690 event info in the following
order: source (1 octet), msgGrp(1), msgNum(2), sev(1),
event(1).
Support status/limitations: future

qsaProcessorUtilizationControlNode 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.1.1.1
Access:        4972
Reference:     None
Description:

qsaProcessorUtilizationControlPollingInterval 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.1.1.2
Access:        read-only
Reference:     None
Description:
Polling Interval for processor data. Polling units are
in seconds. A value of 0 disables the utilization table.
A Set with a value of -1 enables polling with an interval that
is chosen by the system. If the host system determines that
a poll value is out of range, it will round to a value that
is valid.

The default poll time is 15. When the specified poll time is
greater than some of the summary intervals, those summary
rows will contain NULL statistics.
Support status/limitations:
terminals only and read-only: supported in all versions
controller and read-write: future

qsaProcessorUtilizationControlHistoryInterval 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.1.1.3
Access:        read-only
Reference:     None
Description:
Length of time that each history entry represents in the
processor utilization table. The default is 1 hour. The
choices are 15 seconds, 30 seconds, 1 minute, 5 minutes,
15 minutes, 30 minutes, and 1 hour. Possible values are
decimal numbers appended by the unit: d - day, h - hour, m -
minute, or s - second. If no unit is appended, the value is
minutes.
Support status/limitations:
terminals only and read-only: supported in all versions
controller and read-write: future

qsaProcessorUtilizationControlHistorySize 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.1.1.4
Access:        read-only
Reference:     None
Description:
Total number of history entries in the processor utilization
table. The default is 24. This parameter makes the
processor utilization table a variable size table.
Support status/limitations:
terminals only and read-only: supported in all versions
controller and read-write: future

qsaProcessorUtilizationControlLogHistoryData 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.1.1.5
Access:        read-only
Reference:     None
Description:
Setting to true causes each history row to be written to the
log file.
Support status/limitations:
read-only: supported in all versions
read-write: future

qsaProcessorUtilizationNode 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.1
Access:        5116
Reference:     None
Description:
Each entry contains processor utilization statistics over a
different interval.
Support status/limitations:
terminals: supported in all versions
controller: future.

qsaProcessorUtilizationRowIndex 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.2
Access:        5130
Reference:     None
Description:
Each entry contains processor utilization statistics over a
different interval.
Support status/limitations:
terminals: supported in all versions
controller: future.

qsaProcessorUtilizationIntervalName 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.3
Access:        read-only
Reference:     None
Description:
Description of interval.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIntervalStartTime 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.4
Access:        read-only
Reference:     None
Description:
Start time of interval.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIntervalLength 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.5
Access:        read-only
Reference:     None
Description:
Length of Interval over which processor use computed.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIdle 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.6
Access:        read-only
Reference:     None
Description:
Average Percent CPU in idle mode over the interval.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationBusy 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.7
Access:        read-only
Reference:     None
Description:
Average Percent CPU in user and system mode over the
interval.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIdleMinimum 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.8
Access:        read-only
Reference:     None
Description:
Minimum Percent CPU idle mode.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIdleMinChanged 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.9
Access:        read-only
Reference:     None
Description:
Timestamp when qsaProcessorUtilizatonIdleMinimum
last changed.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationBusyMinimum 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.10
Access:        read-only
Reference:     None
Description:
Minimum Percent CPU user and system mode
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationBusyMinChanged 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.11
Access:        read-only
Reference:     None
Description:
Timestamp when qsaProcessorUtilizatonBusyMinimum
last changed.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIdleMaximum 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.12
Access:        read-only
Reference:     None
Description:
Maximum Percent CPU idle mode
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationIdleMaxChanged 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.13
Access:        read-only
Reference:     None
Description:
Timestamp when qsaProcessorUtilizatonIdleMaximum
last changed.
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationBusyMaximum 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.14
Access:        read-only
Reference:     None
Description:
Maximum Percent CPU user and system mode
Support status/limitations:
terminals: supported in all versions
controller: future

qsaProcessorUtilizationBusyMaxChanged 

Registration:  1.3.6.1.4.1.21535.3.3.3.2.2.2.1.15
Access:        read-only
Reference:     None
Description:
Timestamp when qsaProcessorUtilizatonBusyMaximum
last changed.
Support status/limitations:
terminals: supported in all versions
controller: future

qsa4690ControllerInfo1NodeId 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.1
Access:        read-only
Reference:     None
Description:
This controller's node id. CC, DD, etc
Support status/limitations: supported in all versions

qsa4690ControllerInfo1ActiveState 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.2
Access:        read-only
Reference:     None
Description:
Identifies active state of this controller and whether or not
this controller has an active InSight agent.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1LastActiveDateTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.3
Access:        read-only
Reference:     None
Description:
Identifies date/time when this controller was last seen
active.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1SystemManufacturer 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.4
Access:        read-only
Reference:     None
Description:
The manufacturer for this controller. Comes from SMBIOS
information if available or IBM BIOS Vital Product Data.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1SystemProductName 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.5
Access:        read-only
Reference:     None
Description:
The product name for this controller. This is usually a
manufacturer model number as opposed to model name. Comes
from SMBIOS information if available or IBM Vital Product
Data. For example: 8476-20U.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1SystemModelName 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.6
Access:        read-only
Reference:     None
Description:
The model name for this controller. This is derived by
InSight from the manufacturer and model number. Example:
Netfinity 3000.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1SystemSerialNumber 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.7
Access:        read-only
Reference:     None
Description:
The system serial number for this controller. Comes from
SMBIOS information if available or IBM Vital Product Data.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1SystemBiosVersion 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.8
Access:        read-only
Reference:     None
Description:
The system BIOS version number for this controller. Comes
from SMBIOS information if available or IBM Vital Product
Data.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1CpuModel 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.9
Access:        read-only
Reference:     None
Description:
Identifies the CPU Model for this Controller.
0=Unknown
1=286
2=386sx
3=386
4=486sx
5=486
6=Intel Pentium (Family 5)
7=Non-Intel Family 5 (Intel Pentium Class)
8=Intel Pentium Pro, Celeron, PII, PIII (Family 6)
9=Non-Intel Family 6 (Intel Pentium Pro through PIII Class)
10=Intel Itanium (Family 7)
11=Non-Intel Family 7
12=Intel Pentium 4 (Intel Family 15, Ext.Family 0)
13=Non-Intel Family 15, Ext Family 0
14=Intel Itanium 2 (Intel Family 15, Ext.Family 1)
15=Non-Intel Family 15, Ext Family 1
Support status/limitations: supported in all versions

qsa4690ControllerInfo1CpuSpeed 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.16
Access:        read-only
Reference:     None
Description:
Identifies the approximate CPU speed in MHz the controler.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1TotalMemory 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.17
Access:        read-only
Reference:     None
Description:
Identifies the Total Memory for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1DiskCSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.18
Access:        read-only
Reference:     None
Description:
Identifies the size of the C drive for this controller.
Size is reported in K bytes.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1DiskDSize 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.19
Access:        read-only
Reference:     None
Description:
Identifies the size of the D drive for this controller.
Size is reported in K bytes.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1TcpipAddress0 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.20
Access:        read-only
Reference:     None
Description:
Identifies the lan0 tcpip address for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1TcpipAddress1 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.21
Access:        read-only
Reference:     None
Description:
Identifies the lan1 tcpip address for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1MacAddress0 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.22
Access:        read-only
Reference:     None
Description:
Identifies the lan adapter address for the first or
only lan adapter. If there are two lan adapters, the
first adapter is the adapter used for terminal/controller
communications (tcc).
Support status/limitations: supported in all versions

qsa4690ControllerInfo1MacAddress1 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.23
Access:        read-only
Reference:     None
Description:
Identifies the lan adapter address for the second lan
adapter.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1MCFConfiguredMasterRole 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.24
Access:        read-only
Reference:     None
Description:
Identifies the Multiple Controller Feature master role that
is configured for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1MCFConfiguredFileServerRole 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.25
Access:        read-only
Reference:     None
Description:
Identifies the Multiple Controller Feature file server role
that is configured for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1MCFActingMasterRole 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.26
Access:        read-only
Reference:     None
Description:
Identifies the Multiple Controller Feature master role that
is active for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1MCFActingFileServerRole 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.27
Access:        read-only
Reference:     None
Description:
Identifies the Multiple Controller Feature file server role
that is active for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1AgentIPLTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.30
Access:        read-only
Reference:     None
Description:
Local date/time when controller agent started.
Support status/limitations: supported in all versions

qsa4690ControllerInfo1HostName 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.1.1.31
Access:        read-only
Reference:     None
Description:
Hostname of controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2FreeMemory 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.2
Access:        read-only
Reference:     None
Description:
Total amount of available (free) memory
for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2UsedMemory 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.3
Access:        read-only
Reference:     None
Description:
Total amount of used memory
for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2DiskCFree 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.4
Access:        read-only
Reference:     None
Description:
The amount of free space on the C Drive for this controller.
Value reported is K bytes.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2DiskCUsed 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.5
Access:        read-only
Reference:     None
Description:
The amount of used space on the C Drive for this controller.
Value reported in K bytes.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2DiskDFree 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.6
Access:        read-only
Reference:     None
Description:
The amount of free space on the D Drive for this controller.
Value reported in K bytes.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2DiskDUsed 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.7
Access:        read-only
Reference:     None
Description:
The amount of used space on the D Drive for this controller.
Value reported in K bytes.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2LocalTime 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.8
Access:        read-only
Reference:     None
Description:
Local date and time for this controller.
Support status/limitations: supported in all versions

qsa4690ControllerInfo2CpuUtilization 

Registration:  1.3.6.1.4.1.21535.3.3.6.3.1.2.1.9
Access:        read-only
Reference:     None
Description:
Approximate percent CPU utilization over the past update
interval. The update interval default is 2 seconds.
Support status/limitations: supported in all versions
Converted from CHM to HTML with chm2web Pro 2.85 (unicode)