InSight Controller Tool

 

 

All InSight controller and terminal agents can be disabled with the following command on the acting master controller:

qsa_bin:insight -disable

 

Similarly, to enable the InSight controller and terminal agents, type:

qsa_bin:insight -enable

    

Terminals must be reloaded to re-activate terminal agents.

 

To disable only the terminal agents, type:

qsa_bin:insight -disablet

 

To enable the terminal agents, type:

qsa_bin:insight -enablet

 

To verify operating state, type:

qsa_bin:insight -status

 

To verify proper installation to all nodes, use the following command from the acting master controller:

qsa_bin:insight -installVerify

 

To fix any file distribution problems, use:

qsa_bin:insight -installVerifyFix

 

To stop the controller agent and service process on the current node, use:

qsa_bin:insight -stopCA

 

To start the controller agent and service process on the current node, use:

qsa_bin:insight -startCA

 

To manually re-apply the terminal agent to the 4690 terminal loadshrink image files, e.g. after a 4690 OS update, use:

qsa_bin:insight -tprep

 

To see the options, use:

qsa_bin:insight -?